User Manual

156 Xenon XP User Guide

When Check Character is set to Validate and Transmit, the scanner only reads

Code 39 bar codes printed with a check character, and will transmit this character

at the end of the scanned data. Default = No Check Character.

Code 39 Message Length

Scan the bar codes below to change the message length. Refer to Message Length

Description (page 152) for additional information. Minimum and Maximum

lengths = 0-48. Minimum Default = 0, Maximum Default = 48.

Code 39 Append

This function allows the scanner to append the data from several Code 39 bar

codes together before transmitting them to the host computer. When the scanner

encounters a Code 39 bar code with the append trigger character(s), it buffers

Code 39 bar codes until it reads a Code 39 bar code that does not have the append

trigger. The data is then transmitted in the order in which the bar codes were read

(FIFO). Default = Off.

* No Check Character

Validate, but Don’t Transmit

Validate and Transmit

Minimum Message Length

Maximum Message Length

* Off