User Manual

CHAPTER

Xenon XP User Guide 235

UTILITIES

To Add a Test Code I.D. Prefix to All Symbologies

This selection allows you to turn on transmission of a Code I.D. before the decoded

symbology. (See the Symbology Charts, beginning on page 295) for the single

character code that identifies each symbology.) This action first clears all current

prefixes, then programs a Code I.D. prefix for all symbologies. This is a temporary

setting that will be removed when the unit is power cycled.

Show Software Revision

Scan the bar code below to output the current software revision, unit serial number,

and other product information for both the scanner and base.

Test Menu

When you scan the Test Menu On code, then scan a programming code in this

manual, the scanner displays the content of a programming code. The program-

ming function will still occur, but in addition, the content of that programming

code is output to the terminal.

Note: This feature should not be used during normal scanner operation.

Add Code I.D. Prefix to

All Symbologies (Temporary)

Show Software Revision