User Manual

262 Xenon XP User Guide
Straight 2 of 5 Industrial Message
Length
Minimum (1 - 48) *4 R25MIN## 163
Maximum (1 - 48) *48 R25MAX## 163
Straight 2 of 5 IATA Default All Straight 2 of 5 IATA
Settings
A25DFT 164
Straight 2 of 5 IATA *Off A25ENA0 164
On A25ENA1 164
Straight 2 of 5 IATA Redundancy Range (0 - 10) *0 A25VOT## 164
Straight 2 of 5 IATA Message
Length
Minimum (1 - 48) *4 A25MIN## 164
Maximum (1 - 48) *48 A25MAX## 164
Matrix 2 of 5 Default All Matrix 2 of 5
Settings
X25DFT 165
*Off X25ENA0 165
On X25ENA1 165
Matrix 2 of 5 Message Length Minimum (1 - 80) *4 X25MIN## 165
Maximum (1 - 80) *80 X25MAX## 165
Code 11 Default All Code 11
Settings
C11DFT 166
*Off C11ENA0 166
On C11ENA1 166
Code 11 Check Digits Required 1 Check Digit C11CK20 166
*2 Check Digits C11CK21 166
Code 11 Message Length Minimum (1 - 80) *4 C11MIN## 166
Maximum (1 - 80) *80 C11MAX## 166
Code 128 Default All Code 128
Settings
128DFT 167
Off 128ENA0 167
*On 128ENA1 167
ISBT Concatenation *Off ISBENA0 167
On ISBENA1 167
Code 128 Redundancy Range (0 - 10) *0 128VOT## 167
Code 128 Message Length Minimum (0 - 80) *0 128MIN## 168
Maximum (0 - 80) *80 128MAX## 168
Code 128 Append *On 128APP1 168
Off 128APP0 168
Code 128 Code Page Code 128 Code Page (*2) 128DCP## 168
GS1-128 Default All GS1-128 Settings GS1DFT 169
*On GS1ENA1 169
Off GS1ENA0 169
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page