User Manual

268 Xenon XP User Guide
DotCode Default All DotCode Settings DOTDFT 200
On DOTENA1 200
*Off DOTENA0 200
Poor Quality DotCodes Poor Quality DotCodes On DOTEXS1 200
*Poor Quality DotCodes Off DOTEXS0 200
DotCode Msg. Length Minimum (1- 2400) *1 DOTMIN#### 200
Maximum (1- 2400) *2400 DOTMAX#### 200
Digimarc Barcode Decoder Attempts (0-10) *3 DIGSTR## 201
Off DIGENA0 201
On DIGENA1 201
Uses ID Decoder then Both
Decoders
DIGENA2 201
*Uses Digimarc Decoder then
Both Decoders
DIGENA3 201
Uses ID Decoder then Alternates
Decoders
DIGENA4 201
Uses Digimarc Decoder then
Alternates Decoders
DIGENA5 201
Data Matrix Default All Data Matrix Settings IDMDFT 201
*On IDMENA1 201
Off IDMENA0 201
Low Contrast Data Matrix
Enhancements
* Low Contrast Data Matrix
Enhancements On
DEPMENA1 202
Low Contrast Data Matrix
Enhancements Off
DPMENA0 202
Data Matrix Msg. Length Minimum (1-3116) *1 IDMMIN#### 203
Maximum (1-3116) *3116 IDMMAX#### 203
Data Matrix Code Page Data Matrix Code Page (*51) IDMDCP## 203
MaxiCode Default All MaxiCode Settings MAXDFT 204
On MAXENA1 204
*Off MAXENA0 204
MaxiCode Msg. Length Minimum (1-150) *1 MAXMIN### 204
Maximum (1-150) *150 MAXMAX### 204
Aztec Code Default All Aztec Code Settings AZTDFT 205
*On AZTENA1 205
Off AZTENA0 205
Aztec Code Msg. Length Minimum (1-3832) *1 AZTMIN#### 205
Maximum (1-3832) *3832 AZTMAX#### 205
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page