User Manual

Xenon XP User Guide 45
Page Button
When you press the page button on the base or Access Point, the scanners associ-
ated with that base or Access Point will begin beeping (3 short and 1 long beep). If
you press the trigger on a scanner that is beeping in response, or press the page
button on the base or Access Point a second time, all associated scanners will stop
beeping. See Page on page 54 for further information about page button settings.
Note: If you are using a Xenon XP 1950h model, refer to Quiet Operations - LED and
Volume Settings on page 119 for additional Page Button settings.
Page Button and Presentation Modes
When in Streaming Presentation Mode, the scanner’s aimer goes out after a short
time, but the scan illumination remains on all the time to continuously search for
bar codes (see Streaming Presentation™ Mode on page 96). When in Temporary
Streaming Presentation Mode, pressing the page button on the base puts the
scanner into Streaming Presentation Mode until the timeout occurs. If a bar code is
scanned before the timeout is reached, the timer starts over.
When the scanner is in the base, press the page button once to put the scanner
into Temporary Streaming Presentation Mode. When the scanner is in the base and
the base has external power (plugged into an outlet), press the page button twice
to put the scanner into Streaming Presentation Mode. Press it twice again to end
Streaming Presentation Mode. When the base does not have external power, press-
ing the page button twice does not trigger Streaming Presentation Mode.