User Manual

Xenon XP User Guide 61
Flexible Power Management
If you are experiencing network performance issues, and suspect the scanner is
interfering with other devices, you can turn down the power output of the scanner.
This reduces the range between the scanner and a base or an Access Point as
shown in the following illustration:
Xenon XP 1952g/1952h
Scan one of the bar codes below to set the scanner’s power output to Full Power
(100%), Medium High Power (87%), Medium Power (50%), or Low Power (1%).
Default = Full Power.
802.11
LAN
Reduced
Power
Scanner
Full
Power
* Full Power
Medium Power
Medium Low Power
Low Power