User Manual

Xenon XP User Guide 75
Pair with Bluetooth Low Energy (BLE) Devices
Use the following codes to connect to Bluetooth low energy devices. Scan HID BLE
Connect to connect the scanner to Bluetooth Low Energy HID devices. Scan Serial
BLE Connect to establish two-way communication between the scanner and Blue-
tooth Low Energy serial devices.
Bluetooth Serial Port - PCs/Laptops
Scanning the Non-Base BT Connection bar code below unlinks your scanner and
puts it into a discoverable state. Once the scanner searches for and connects with
a Bluetooth host, the scanner stores the connection to the host device address and
switches virtual COM ports. This allows the scanner to automatically relink to the
host if the connection is lost.
PDAs/Mobility Systems Devices
You may also use the scanner with a PDA or a Honeywell Mobility Systems device.
Scan the bar code below and follow the instructions supplied with your Bluetooth
device to locate the scanner, and connect with it.
HID BLE Connect
Serial BLE Connect
Non-Base BT Connection
BT Connection - PDA/Mobility Systems Device