Owner's Manual

24 69-0628B—1
M8894
ANTICIPATOR
SETTING LEVER
ANTICIPATOR
SCALEPLATE
Servicing the Thermostat
Cycle Rate Adjustment
The equipment should cycle on and off just
enough to keep the room temperature close to
the temperature lever settings.
If the thermostat seems to cycle the heating
system too fast or too slow, adjust the cycle rate
by moving the anticipator setting lever one
indicator mark at a time (Fig. 6). Observe the
heating system operation after each adjust-
ment. Increasing the anticipator setting will
decrease the cycle rate.
System cph
Gravity air/water 1
Hot water 3
Gas/oil warm air 6
Electric warm air 9
Fig. 6—Heat Anticipator Setting.