MICRO SWITCH™ Watertight Miniature Basic Switches V15W Series Datasheet
MICRO SWITCH™ V15W Series Watertight Miniature Basic Switches Honeywell MICRO SWITCH™ V15W Series miniature, sealed basic switches feature industrial-grade performance (IP-rated sealing and 10 A electrical rating). These redesigned and upgraded switches are cost-effective solutions for a variety of applications. The V15W switch with sealed plunger and sealed wire leads conforms to the IP67 environmental seal rating (temporary submersion).
Features and Benefits EXCELS IN DUSTY, DIRTY, WET CONDITIONS Silicone rubber plunger seal and epoxy resin assure the V15W Series delivers high sealing capability with an IP67 rating on all pre-leaded switches that makes them a great choice for wet, dirty, and/or dusty application settings.
Potential Applications FOOD PACKAGING PLANTS Performs a variety of position and counting functions ATV AND OFF-ROAD VEHICLES Often used in brake light assemblies, brake position detection, handle bar controls, run-away prevention, shift lever position, and marine controls GARBAGE AND SALT TRUCKS, COMMERCIAL BUSES, VANS Operates in a variety of functions, including lift position, door ajar/open, salt spreader on/off detection, and wheel chair lifts (sense position of movable platforms) VENDING MACHINES Ai
MICRO SWITCH™ Watertight Miniature Basic Switches PRODUCT NOMENCLATURE V15W — Switch Type — D Z 200 A 02 Terminals/Wiring Circuitry Operating Force Lever Location Lever Type Pin plunger MICRO SWITCH™ D V-Basic Standard E V15W Watertight Switch W 4,8 mm x 0,8 mm Z SPDT 050 50 g max. 4,8 mm x 0,5 mm P SPNO 100 100 g max. A Lever pivot far from plunger 01 Short straight lever 300 mm long wires1 C SPNC 150 150 g max.
V15W Series O.F. • R.F. • P.T. • O.T. • D.T. • O.P. • PRODUCT SPECIFICATIONS AND LISTINGS Contact your Honeywell rep or distributor for additional listings Catalog Listing Pin plunger Elec. Rating (see page 5) Operating force Release force Pretravel Overtravel Differential travel Operating position Termination Circuitry/ Contacts O.F. max. newtons [grams] O.P. nominal P.T. max. O.T. min. D.T. max. V15W-DZ200-AW1 W1 QC: 4,8 mm x 0,8 mm SPDT/ gold-plated 1,96 [200] 14,7 mm [0.
MICRO SWITCH™ Watertight Miniature Basic Switches PRODUCT SPECIFICATIONS AND LISTINGS Contact your Honeywell rep or distributor for additional listings Catalog Listing Long roller lever Elec. Rating (see page 5) O.F. • R.F. • P.T. • O.T. • D.T. • O.P. • Operating force Release force Pretravel Overtravel Differential travel Operating position Termination Circuitry/ Contacts O.F. max. newtons [grams] O.P. nominal P.T. max. O.T. min. D.T. max.
V15W Series MOUNTING DIMENSIONS TERMINATION OPTION DIMENSIONS Termination Type “D” QC: 4,8 mm x 0,8 mm Termination Type “E” QC: 4,8 mm x 0,5 mm Termination Type “W” 300 mm long wires Wire Gauge 16 18 20 22 24 26 8 sensing.honeywell.com Insulation Outside Diameter Ø3,10 mm [0.127 in] Ø2,80 mm [0.110 in] Ø2,60 mm [0.102 in] Ø2,40 mm [0.094 in] Ø2,20 mm [0.086 in] Ø2,08 mm [0.
MICRO SWITCH™ Watertight Miniature Basic Switches STANDARD LEVER DIMENSIONS Lever Type “01” Short Straight Lever Lever Type “04” Simulated Roller Lever Lever Type “03” Long Straight Lever Lever Type “05” “06” Lever Type “02” Standard Straight Lever Lever Type “05” Roller Lever Lever Type “06” Long Roller Lever This Honeywell datasheet supports the following MICRO SWITCH™ V15W Series Basic Switch Listings V15W-DZ100A01-AW1 V15W-DZ200A02-AW1 V15W-DZ200A02-W2 V15W-DZ200A04-W2 V15W-DZ200A05-AW1 V15W-DZ20
V15W Series ADDITIONAL INFORMATION The following associated literature is available on the Honeywell web site at sensing.honeywell.com: • Product installation instructions • Product range guide • Product nomenclature tree • Product application-specific information WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury.
Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell’s sensing and control products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.
