Installation Guide

TRANSMITTER OPERATION (FIG.4) )
High / Medium / Low Speed – Tap lightly to turn the fan on at high, medium or low
speed respectively.
Fan Off – Tap lightly to turn the fan off.
Light –Tap lightly to turn light on or off. Hold down for 2 seconds to cycle through
dimmer setting. The light button has an auto resume feature so the light will
re-activate at the same brightness as the last time it was turned off.
NOTE: The dimmer function does not work with CFL bulbs.
Walk Away Light Delay – Tap once - the light and fan turn off after 1 minute. Light
on the fan blinks once to confirm function is active. Press any button to cancel function.
D/O – Set the light for use with incandescent bulbs or compact fluorescent bulbs (CFL).
LEARN – Synchronizes transmitter and receiver signals.
NOTE: Factory default setting is CFL.
INSTALLING THE WALL MOUNT BRACKET S
1. Locate wall mount in a convenient location
2. Use two screws (included) and wall anchors to install wall mount bracket as shown
in FIG. 5. (Tools required for assembly: Philips screwdriver, not included)
TROUBLE SHOOTING G
 Review receiver wiring – is it wired correctly and receiving power?
 Is the fan speed control on HI and light switch in the ON position?
 Are all batteries new and fully charged?
 Learning process between fan and transmitter may not have been successful – see
step 2 under activating the learning process
 Won’t operate at a distance – make sure antenna wire is visible and not obstructed
WARRANTY G
This product is warranted to be free from defects in material and workmanship, under normal use and
maintenance, for a period of (1) year from the date of purchase. This warranty shall not cover any
removal or reinstallation costs, and shall not apply to: (i) cosmetic damage, such as scratches, nicks
and dents; (ii) any alteration or improper repair, maintenance, handling, or installation; (iii) the
combination of the product with other systems or components; (iv) consumable parts, such as batteries,
including any deterioration or damage to the product caused by the use of faulty batteries; (v) damage
caused by accident, abuse, misuse, water, flood, fire, or other acts of nature or external causes; (vi)
damage caused by service performed by anyone who is not an authorized service provider; or (vii)
damage to a product that has been modified or altered. Your sole and exclusive remedy for a breach
of warranty shall be replacement of the product. Alternatively, you may return your product to the
retailer from which you made your purchase in accordance with applicable return policies.
THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ANY
LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE. IN NO EVENT SHALL
ANY PARTY BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS
PRODUCT OR FROM DEFECTS IN THE PRODUCT. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
To obtain warranty service, please call the customer service number below. One of our customer
service representatives will assist you in determining whether you have a warranty claim and, if so,
how to return your product. If you return your product for a warranty claim, please securely pack
your product and include a copy of the original sales receipt, which is required as the proof of
purchase for all warranty claims. You shall be responsible for shipment and assume all costs and
risks associated with any product return.
The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell
International Inc. makes no representations or warranties with respect to this product.
This product is manufactured for:
Hong Kong China Electric Appliance Manufacture Co., Ltd.
3059 Forest Hill Irene Rd, Ste 103
Germantown, TN 38138
1-877-580-4359
FIG 4
TRANSMITTER OPERATION
WALL MOUNT
BRACKET
FIG 5
WALL MOUNT BRACKET
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna. Increase
the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. --Consult the dealer or an experienced radio/TV
technician for help.
CAUTION:
To assure continued FCC compliance:
Any changes or modifications not expressly approved by the grantee of
this device could void the user's authority to operate the equipment.
FCC ID：KUJCE10003
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
One Year Limited Warranty
If you have questions regarding this product, before returning
to your retailer, call our customer service department toll free
at 1-877-580-4359
High Speed
Medium Speed
Light
Fan Off
Low Speed
Walk Away Light Delay