User manual
2. General characteristics
The basic characteristics of the ScanPall2 are as follows:
Electrical characteristics
• Main battery................................ two AAA replaceable batteries or one Ni-MH
rechargeable battery
• Backup battery............................ 3.0 V, 7.0 mAh rechargeable lithium battery,
for the static random access memory
(SRAM) and the calendar
• Stand-alone operation ................ over 100 hours and over 50,000 reads (CPU
in low-speed mode and 1 read every 5
seconds)
Environment
• Humidity (operating) ................... non-condensing from 10% to 90%
• Humidity (storage) ...................... non-condensing from 5% to 95%
• Temperature (operating)............. from -20° C to 60° C (-4° F to 140° F)
• Temperature (storage)................ from -30° C to 70° C (-22° F to 158° F)
• EMC regulations ......................... FCC class A, CE and C-Tick approved
(EMC: Electromagnetic compatibility) (FCC: Federal Communications Commission)
• Shock resistance ........................ 1.2 m (4’) drop on to concrete
Physical characteristics
• Dimensions................................. 145 mm (5.7”) L x 63 mm (2.5”) W x 33.5
mm (1.3”) H
• Weight ........................................ 180 g (6.3 oz) including batteries
• Color........................................... dark grey
• Material....................................... ABS (Acrylonitrile Butadiene Styrene)
CPU
• Toshiba 16-bit CMOS microprocessor