User's Guide

6 - 3
The Code 39 Format bar code below sets the terminal ID to 61, and the Same
Code Format bar code sets the terminal ID to 64.
Wand Emulation Multi Block
Note: See "Imager Models" on page 6-1 to determine which interfaces apply to
your imager.
Note: Changing secondary wand emulation settings also changes the primary
wand emulation settings (see Wand Emulation on page 2-13).
Delay Between Blocks
This sets the delay time between data blocks. Default = 50ms.
Wand Emulation
Code 39 Format
Wand Emulation
Same Code Format
5ms
500ms
* 50ms
150ms