50196-03 Fan Manual

Closemount

Screws

Spring

Washer

Fig. 15

CLOSEMOUNT INSTRUCTIONS

16. Raise the fan and place the canopy on the

mounting bracket hook for wiring. Insert the

receiver into the mounting bracket with the at side

facing the ceiling (Fig. 16).

Canopy

Receiver

Hook

Canopy

Cover

Fig. 14

Fig. 16

14. Remove the canopy cover from the bottom of the

canopy (Fig. 14).

Helpful Hint: Closemount mounting is more suitable

for ceilings lower than 8 ft. (2,44 m) high. The

downrod, hanging ball, and canopy cover are not

used in this type of installation.

Closemount Screw

Spring Washer

15. Align the canopy with the closemount screw

holes in the top of the motor assembly. Secure

the canopy to the top of the motor assembly by

installing three closemount screws and spring

washers into the top of the motor housing (Fig. 15).

Ceiling