50196-03 Fan Manual

BLADE INSTALLATION

20. Insert blade arm through slots in the side of the

motor assembly. Align the holes of one blade arm

with two motor screw holes in underside of the motor

assembly. Secure with two motor screws. Repeat

this step for the remaining blade arms (Fig. 20).

20. Partially insert three blade screws along with three

blade washers through one blade and into one

blade arm. Tighten each blade screw with a Phillips

screwdriver, starting with the one in the middle.

Repeat this step for the remaining blades and

blade arms (Fig. 20).

Blade

Blade Arm

Blade Screw

Washer

Blade

Motor Screw

Fig. 20

Fig. 19

Blade Screw

Motor Screw

Washer