50196-03 Fan Manual

LIGHT KIT INSTALLATION

Fig. 26

Fig. 24

Fig. 25

Switch Housing

Cover Screw

Switch

Housing

Cover

26. Lift the glass globe up to the light kit and twist tightly

in a clockwise direction until it is secure (Fig. 26).

25. Install bulbs (Fig. 25).

Important: When replacing the bulb, allow bulb and

light kit to cool before touching.

24. Connect the two 4-pin connectors and two 9-pin

connectors from the switch housing. Insert the

connectors into the switch housing. Then, install

the switch housing cover to the switch housing

using the switch housing cover screws that were

previously removed (Fig. 24).

Bulb

Switch Housing

Cover Screw

Glass Globe