50196-03 Fan Manual

4. Remove the two mounting bracket screws and
washers from the round holes in the canopy and
loosen the other two screws. Set aside for later
use. Detach mounting bracket from canopy (Fig. 4).
5. Secure the mounting bracket to the outlet box using
screws and washers provided with the outlet box
(not included) (Fig. 5).
Note: It is very important that you use proper hardware
when installing the mounting bracket as it supports
the fan.
Important: If using the angle mount, ensure that the
open end of the mounting bracket is installed facing
the peak of the ceiling.
Fig. 4
Fig. 5
Mounting
Bracket
Screws
Mounting
Bracket
Canopy
Washer
6
MOUNTING BRACKET INSTALLATION
Mounting Bracket
Screw
Washer