50203-03 Fan Manual

Closemount

Screws

Spring

Washer

Fig. 14

CLOSEMOUNT INSTRUCTIONS

13. Remove the canopy cover from the bottom of the

canopy (Fig. 13).

Helpful Hint: Closemount-style mounting is more

suitable for ceilings lower than 8 ft. (2,44 m) high.

The downrod and canopy cover are not used in this

type of installation.

15. Raise the fan and place the canopy on the hook

located on the mounting bracket for wiring (Fig. 15).

Canopy

Hook

Canopy

Cover

Fig. 13

Fig. 15

Closemount Screw

Spring Washer

14. Align the canopy with the closemount screw

holes in the top of the motor assembly. Secure

the canopy to the top of the motor assembly by

installing three closemount screws and spring

washers into the top of the motor housing (Fig. 14).