50205-03 Fan Manual

LIGHT KIT INSTALLATION

23. To install the fan with a light kit: Remove the

three screws and washers from upper switch

housing. Connect the single pin connectors from

the light kit to the single pin connectors from the

upper switch housing -- black to blue and white to

white. Make sure plugs connect tightly (Fig. 23).

24. Align holes in the light kit with holes in upper switch

housing. Re-insert screws and washers that were

previously removed. Use a Phillips screwdriver (not

included) to secure all screws (Fig. 24).

Fig. 23

Fig. 24

Screw and

Washer

Screw Washer

Screw

Washer

22. (Optional) To install the fan without a light kit:

Remove the three screws and washers from the

upper switch housing. Align holes in optional cap

with holes in upper switch housing. Re-insert

screws and washers that were previously removed.

Use a Phillips screwdriver (not included) to secure

all screws (Fig. 22).

Proceed to step 28.

Fig. 22

Optional

Cap

Screw

and

Washer

Screw

and

Washer

Upper

Switch

Housing

Light

Kit