Spec Sheet

©Generac Power Systems, Inc. All rights reserved.
Specifications subject to change without notice.
The Honeywell trademark is used under license from Honeywell International Inc.
Honeywell International Inc. makes no representation or warranties with respect to this product.
This product is manufactured by Generac Power Systems, Inc., Waukesha, WI. 53187, USA.
For more information
www.honeywellaidc.com
Generac Power Systems, Inc.
S45 W29290 Hwy. 59
Waukesha, WI. 53189
1.855.GEN.INFO
www.honeywellgenerators.com
Part No. 10000000220 Revision E (03/16/18)
16 / 20 / 22 kW
Available Accessories
MODEL # PRODUCT DESCRIPTION
G0070050
WiFi LP Fuel Level
Monitor
The WiFi enabled LP fuel level monitor provides constant monitoring of the connected LP fuel tank.
Monitoring the LP tank's fuel level is an important step in making sure your generator is ready to run
during an unexpected power failure. Status alerts are available through a free application to notify when
your LP tank is in need of a refill.
G0058190 26R Wet Cell Battery
Every standby generator requires a battery to start the system. Generac offers the recommended 26R wet
cell battery for use with all air-cooled standby product (excluding PowerPact®).
G0071010 Battery Pad Warmer
The pad warmer rests under the battery. Recommended for use if the temperature regularly falls below 0°F
(18°C) . (Not necessary for use with AGM-style batteries.)
G0071020 Oil Warmer
Oil warmer slips directly over the oil filter. Recommended for use if the temperature regularly falls below
0°F (18°C).
G0071031 Breather Warmer
The breather warmer is for use in extreme cold weather applications. For use with Sync™ controllers only in
climates where heavy icing occurs.
G0056210
Auxiliary Transfer Switch
Contact Kit
The auxiliary transfer switch contact kit allows the transfer switch to lock out a single large electrical load
you may not need.
G0061600 Paint Kit
If the generator enclosure is scratched or damaged, it is important to touch up the paint to protect from
future corrosion. The paint kit includes the necessary paint to properly maintain or touch up a generator
enclosure.
G0064850 Scheduled Maintenance Kit
Scheduled maintenance kits provide all the hardware necessary to perform complete routine maintenance
on a Honeywell automatic standby generator.
G0068740
Smart Management
Module (50 Amps)
Manage large loads by utilizing up to 8 individual Smart Management Modules. These devices are
installed directly in line with existing appliance wiring for easy installation.
Dimensions & UPCs
MODEL UPC
G007059-1
696471074246
G007062-1
696471074253
G007065-2
696471074284
648 mm
[25.5 in]
727.2 mm
[28.6 in]
637.6 mm
[25.1 in]
1232 mm
[48.5 in ]
1218 mm
[48.0 in]
LEFT SIDE VIEW
FRONT VIEW