8690i Mini Wearable Mobile Computer Quick Start Guide 8690i-EN-QS Rev (a) 10/20
Overview Battery latch Battery Left button 95% Right button User window Scanner Note: The battery must be fully charged before the first use. An MB4-BAT-SCN07 or an MB4-SCN07 Charging Station must be purchased separately.
Attach the Scanner to Your Hand 2
Pull the finger strap to secure it and tuck the excess strap length into the finger guide channel.
Right or Left Handed Operation To release the finger trigger, turn over the scanner. Slide the latch toward the user window to release the finger trigger. Turn the finger strap around and snap it into place to change the operation to the correct hand.
Power Up the Scanner Press the trigger to power up the scanner. The battery, WiFi, and Bluetooth status appear in the window. User Window 95% The user window displays prompts for using the scanner in your environment. The buttons to the left and right of the window are used to scroll through the windows or to enter responses to screen prompts. • Press both the right and left buttons at the same time to view the WiFi, Bluetooth, and battery status.
Wrist Position When Scanning ! Warning: Do not stare directly into the laser beam. How to Scan a Bar Code The 8690i scanner has a view finder that projects a bright aiming pattern. This aiming pattern should be centered over the bar code, but it can be positioned in any direction for a good read. Connect the Scanner via Bluetooth® Pair with a PC or Laptop Bluetooth Serial Port: Host Reconnect Mode The 8690i can pair with host Bluetooth devices such as personal computers, laptops, and tablets.
1. Scan the Host Reconnect Mode bar code, below. Host Reconnect Mode 2. Set your host device so it searches for other Bluetooth devices. (Refer to your host device’s User’s Guide for pairing instructions.) 3. Once your host device has located the scanner, select the 8690i scanner name from the list displayed. Note: Refer to the 8690i User’s Guide if your host device displays a PIN. The Bluetooth symbol appears in the scanner window when the scanner pairs with a host.
1. Scan the Scanner Reconnect Mode bar code below. Scanner Reconnect Mode 2. Set your host device so it searches for other Bluetooth devices. (Refer to your host device’s User’s Guide for pairing instructions.) 3. Once your host device has located the scanner, select the 8690i scanner name from the list displayed. Note: Refer to the 8690i User’s Guide if your host device displays a PIN. The Bluetooth symbol appears in the scanner window when the scanner pairs with a host.
1. Scan the Bluetooth HID Keyboard Connect bar code below. Bluetooth HID Keyboard Connect 2. Set your host device so it searches for other Bluetooth devices. (Refer to your host device’s User’s Guide for pairing instructions.) 3. Once your host device has located the scanner, select the 8690i scanner name from the list displayed. Note: Refer to the 8690i User’s Guide if your host device displays a PIN. The Bluetooth symbol appears in the scanner window when the scanner pairs with a host.
Pair with an Android™ Mobile Device Tap and Pair You can pair your Android™ phone with the 8690i by touching the devices together. 1. Make sure the NFC setting is On in your phone. 2. Touch the Android phone to the scanner. 3. The phone recognizes the scanner and prompts you to pair. 4. Verify the pairing of the 8690i in your phone’s Bluetooth settings.
3. On the mobile device, the 8690i scanner is shown as a keyboard. Click on it to pair. The Bluetooth symbol appears in the scanner window when the scanner pairs with a mobile device. Pair with a Honeywell Vehicle Mount Computer The 8690i can pair with Honeywell vehicle mount computers, such as the Thor VM1 or VM2, or with Tecton mobile computers. 1. Scan the Bluetooth HID Keyboard Disconnect bar code below. Bluetooth HID Keyboard Disconnect 2.
Reset Custom Defaults If you want the custom default settings restored to your 8690i, scan the Activate Custom Defaults bar code below. This is the recommended default bar code for most users. It resets the 8690i to the custom default settings. If there are no custom defaults, it resets the 8690i to the factory default settings (Bluetooth HID Keyboard Emulation). Any settings that have not been specified through the custom defaults are defaulted to the factory default settings.
When the battery is low, the 8690i beeps and vibrates and the window shows a Battery Low warning. You can also press both the right and left buttons at any time to view the battery’s charge status. To replace the battery, squeeze the battery latch and lift up on the battery. Replace the battery by snapping it in to the scanner.
Support To search our knowledge base for a solution or to log into the Technical Support portal and report a problem, go to www.hsmcontactsupport.com. User Documentation For the user guide and other documentation, go to www.honeywellaidc.com. Limited Warranty For warranty information, go to www.honeywellaidc.com and click Resources > Product Warranty. Patents For patent information, see www.hsmpats.com. Disclaimer Honeywell International Inc.
this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright2020 Honeywell International Inc. All rights reserved.
8690i-ML-RS-01 Rev (a) Agency Model: 8690i Product documentation is available at www.honeywellaidc.com. La documentation sur le produit est disponible à www.honeywellaidc.com. La documentation du produit est disponible sur le site www.honeywellaidc.com. La documentazione sul prodotto è disponibile sul sito www.honeywellaidc.com. Die Produktdokumentation ist unter www.honeywellaidc.com verfügbar. La documentación del producto está disponible en www.honeywellaidc.com. 卝嵴篎肎 審 www.honeywellaidc.
Patents Brevets Brevets Brevetti Patente Patentes Patentes Patentes For patent information, refer to www.hsmpats.com. Veuillez consulter le site www.hsmpats.com pour obtenir des renseignements au sujet du brevet. Pour plus d’informations sur les brevets, visitez la page www.hsmpats.com. Per i dettagli sui brevetti, fare riferimento al sito Web www.hsmpats.com. Patentinformationen sind unter www.hsmpats.com erhältlich. Para obtener información sobre las patentes, visite www.hsmpats.com.