Owner's Manual

(~hanging
system setup
Note:
Touch the orange
Help
button on any screen for more information.
System Setup
Options
(SETTINGS >
System Setup)
Screen Title
I
Settings and
Options
(Options vary depending on setup.)
Language
English/Fran<;ais/Espanol.
Thermostat
installed
Home/Business (Thermostat is used
in
a residential (default)
or
in
commercial setting).
Touch
THERMOSTAT
button to display a screen where you can enter a
Your thermostat
custom name using a keypad.
If
you have only one
thermostat, you can
location leave the name as
THERMOSTAT.
For business
installations
you can check
a box to display the thermostat name
on the home screen.
Your thermostat
Select Heating
or
Cooling or both (default).
controls
Select Forced Air (default), Heat Pump, or Hot Water or Steam. Each option
Your system type offers different choices on the following
screens. See Step 9e under
Installing
your Thermostat on page 1
0.
Your forced air
Select type of furnace. This menu option only appears if
Forced
Air
is
heating system type
selected for "Your
System
Type".
Efficiency
of your
Select Standard Efficiency Forced Air (default)
or
High Efficiency Forced
heating system
Air.
Your heating system
If
you selected Hot Water or Steam on "Your
system
type," select the
type
specific heating system here.
Number of
cooling
Select 1 Stage (default) or 2 Stages.
If
you are unsure, note which wires
you have connected: 'Y' wire only
(1
stage) or 'Y' and 'Y2'(refer to your
stages
check list
in
Step 6 on page 5.)
Select 1 Stage (default) or 2 Stages.
If
you are unsure, note which wires
Number of heating
you have connected: 'W' wire only
(1
stage) or 'W' and 'W2' (refer to your
stages
check list
in
Step 6 on page 5.) Number of heat stages
only
appears
if
"Forced Air''
is
selected
for
"Your
System
Type".
Select whether your thermostat (default) or heating system controls the fan.
Your fan control
Your fan control only appears if
"Electric"
is selected for
"Your
Forced Air
Heating System
Type".
If
you selected Heat Pump on
"Your
system
type," select whether it uses a
Type of changeover
cooling changeover valve (default)
or
heating changeover valve. f you are
valve
unsure, note which wires you have connected: refer to your check list
in
Step 6 on page
6.
Number of heat
Select 1 Stage (default) or 2 Stages.
If
you are unsure, note which
wires
pump compressor
you have connected: 'Y' wire only
(1
stage)
pr
'Y' and 'Y2'(refer to your
stages
check list
in
Step 6 on page 6.).
No or
Yes
(default) you can determine whether you have backup heat by
Your backup heat refering to your check list
in
Step 6 on page
6.
Your backup heat only
appears if
"Your
System
Type" is set to Heat Pump.
29