Basic Board Mount Pressure Sensors ABP Series—High Accuracy Digital or Analog Output Compensated/Amplified 60 mbar to 10 bar | 6 kPa to 1 MPa | 1 psi to 150 psi Datasheet
Basic Amplified Board Mount Pressure Sensors The Basic Amplified ABP Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range.
General Specifications Table 1. Absolute Maximum Ratings1 Characteristic Min. Max. Unit Supply voltage (Vsupply) -0.3 6.0 Vdc Voltage on any pin -0.3 Vsupply + 0.3 V Digital interface clock frequency: I 2C SPI 100 50 400 800 kHz 2 — kV -40 [-40] 85 [185] °C [°F] ESD susceptibility (human body model) Storage temperature Soldering time and temperature: lead solder temperature (DIP) peak reflow temperature (Leadless SMT, SMT) 4 s max. at 250 °C [482 °F] 15 s max.
Operating Specifications Table 5. Operating Specifications Analog Characteristic Digital Unit Min. Typ. Max. Min. Typ. Max. 3.0 4.75 3.3 5.0 3.6 5.25 3.0 4.75 3.3 5.0 3.6 5.25 Vdc — — — 2.1 2.7 — 2.8 3.8 — — — — 3.1 3.7 1 3.9 4.6 10 mA mA µA -40 [-40] — 85 [185] -40 [-40] — 85 [185] °C [°F] 0 [-32] — 50 [122] 0 [-32] — 50 [122] °C [°F] Temperature output option6 — — — — 1.
Transfer Function Limits Figure 1.Temperature Output Option Temperature Error1, 2 2.5 Error (°C) 1.5 0 -1.5 -2.5 -40 0 50 25 85 Temperature (°C) Operating temperature range: The temperature range over which the sensor will produce an output proportional to pressure. 1 Compensated temperature range: The temperature range over which the sensor will produce an output proportional to pressure within the specified performance limits. 2 Figure 2.
Nomenclature Order Guide Basic Board and Mount Pressure Sensors ABP Series—High Accuracy Digital or Analog Output, Compensated/Amplified Figure 3. Nomenclature and Order Guide For example, ABPDNNN150PGAA3 defines an ABP Series Amplified Basic Pressure Sensor, DIP package, NN pressure port, dry gases only, no diagnostics,150 psi gage pressure range, analog output type, 10% to 90% of Vsupply (analog), 214 counts (digital) transfer function, no temperature output, no sleep mode, 3.3 Vdc supply voltage.
Pressure Range Specifications Table 7. Pressure Range Specifications Pressure Range (see Figure 3) Pressure Range Pmin. Unit Overpressure1 Burst Pressure2 Pmax. Common Mode Pressure3 Total Error Band4 (%FSS) Long-term Stability 1000 hr, 25 °C (%FSS) 10000 10000 10000 10000 10000 10000 10 10 10 10 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±0.25 ±0.25 ±0.25 ±0.25 ±0.25 ±0.25 ±0.25 ±0.25 ±0.25 ±0.25 5450 10000 10000 10000 10000 10000 10 10 10 16 17 17 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.5 ±1.
Pressure Range Specifications PCB Pad Layouts Table 7. Pressure Range Specifications (continued) Pressure Range Pressure Range (see Figure 3) Pmin. Unit Overpressure1 Burst Pressure2 Pmax. Common Mode Pressure3 Total Error Band4 (%FSS) Long-term Stability 1000 hr, 25 °C (%FSS) 150 150 150 150 250 ±1.5% ±1.5% ±1.5% ±1.5% ±1.5% ±0.25% ±0.25% ±0.25% ±0.25% ±0.25% 150 150 150 150 250 250 250 ±1.5% ±1.5% ±1.5% ±1.5% ±1.5% ±1.5% ±1.5% ±0.25% ±0.25% ±0.25% ±0.25% ±0.25% ±0.25% ±0.
Dimensional Drawings DIP Packages Figure 5. DIP Package Dimensional Drawings (For reference only: mm [in].) DIP NN: No port 3,23 Wet media [0.127] 2,95 Dry media [0.116] 7,3 [0.29] 4,0 [0.16] 4 6 5 2,54 Typ. [0.100] 8,0 [0.32] 6 5 4 2 3 2X 1,45 [0.057] 5,5 [0.22] 6,3 [0.25] 3 2 DIP AN: Single axial barbed port 1,0 [0.04] 1 7,3 [0.29] 4,0 [0.16] 4 1 8,6 [0.34] ø1,91 0,25 Typ. [0.010] 3,63 Wet media [0.143] 3,35 Dry media [0.131] 7,00 [0.276] 6 5 11,0 [0.43] 11,5 [0.45] 3,56 [0.
Dimensional Drawings DIP Packages Figure 5. DIP Package Dimensional Drawings (continued) DIP JJ: Dual radial barbless ports, same side 3,38 Wet media [0.133] 3,10 Dry media [0.122] 2,08 [0.082] 2X 4,0 [0.16] 4 5 6 8,0 [0.32] 2,54 Typ. [0.100] 6 2,10 [0.083] Port 1 5 4 2X 1,47 [0.058] 2X 4,65 [0.183] 2X ø1,88 [0.074] 4,45 [0.175] 6,3 [0.25] Port 1 Port 2 11,5 [0.45] 11,0 [0.43] Port 2 4,45 [0.175] 3 2 1 1,0 [0.04] 7,3 [0.29] 0,25 Typ. [0.010] 8,6 [0.34] 1 6X 0,46 [0.
Dimensional Drawings SMT Packages Figure 6. SMT Package Dimensional Drawings (For reference only: mm [in].) SMT NN: No port 3,23 Wet media [0.127] 2,95 Dry media [0.116] 0,25 Typ. [0.010] 7,3 [0.29] 4,0 [0.16] 4 6 5 6 8,0 [0.32] 5 4 5,5 [0.22] 6,3 [0.25] 3 SMT AN: Single axial barbed port 4,0 [0.16] 2 11,5 [0.45] 1 1,0 [0.04] 7,00 [0.276] 7,3 [0.29] 4 6X1,28 [0.050] 2 6X 0.46 1 [0.018] 2,54 Typ. [0.100] 4,2 [0.17] 3,63 Wet media [0.143] 3,35 Dry media [0.131] 0,25 Typ. [0.
Dimensional Drawings SMT Packages Figure 6. SMT Package Dimensional Drawings (continued) SMT JJ: Dual radial barbless ports, same side 3,38 Wet media [0.133] 3,10 Dry media [0.122] 2,08 [0.082] 2X 4,65 2X 4,0 [0.183] [0.16] 4 5 6 2,10 [0.083] Port 1 6,3 [0.25] Port 1 Port 2 11,5 [0.45] 0,25 Typ. [0.010] Port 2 3 2 1,0 [0.04] 1 7,3 [0.29] 2X 1,45 [0.057] 6 5 5,06 ±0,3 Wet media [0.199 ±0.012] 4,78 ±0,3 Dry media [0.188 ±0.012] 4 2X ø1,88 [0.074] 4,45 [0.175] 11,0 [0.43] 4,45 [0.
Dimensional Drawings Leadless SMT Packages Figure 7. Leadless SMT Package Dimensional Drawings (For reference only: mm [in].) Leadless SMT AN: No port 3,23 Wet media [0.13] 2,95 Dry media [0.12] 1,0 [0.04] 4,0 [0.16] 1 2 3 3,5 [0.14] 6,3 [0.25] 6 5 3 2 1 7,0 6X 0,25 [0.28] [0.049] 3,00 [0.118] 4 4 5 2,5 Typ. [0.10] 1,0 [0.04] 7,3 [0.29] 6 1,5 [0.06] 8,0 [0.32] Leadless SMT AN: Single axial barbed port 3,63 Wet media [0.14] 3,35 Dry media [0.13] 4,0 [0.16] 1 2 7,0 [0.28] 3,56 [0.
ADDITIONAL INFORMATION The following associated literature is available at sensing.honeywell.com: • Product Line Guide WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. • Product Range Guide • Product Nomenclature Tree • Installation Instructions Failure to comply with these instructions could result in death or serious injury.
