Datasheet

2
sensing.honeywell.com
Basic Amplified Board Mount Pressure Sensors
The Basic Amplified ABP Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for
reading pressure over the specified full scale pressure span and temperature range.
The ABP Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects and accuracy
errors (which include non-linearity, repeatability and hysteresis) using an on-board Application Specific Integrated Circuit (ASIC).
Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital.
The ABP Series is calibrated over the temperature range of 0 °C to 50 °C [32 °F to 122 °F]. The sensor is characterized for
operation from a single power supply of either 3.3 Vdc or 5.0 Vdc. These sensors measure gage and differential pressures.
The Basic Amplified pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases.
The following options extend the performance of these sensors to non-corrosive liquids.
• Nosiliconegelcoating:Theinputportislimitedtonon-corrosive,non-ionicmediasuchasdryairandgasesandshouldnot
be exposed to condensation. The gases are limited to media that are compatible with high temperature polyamide, silicone,
alumina ceramic, silicon, gold, and glass.
• Siliconegelcoating:Usesthesamematerialsinthewettedmediapathbutisprotectedfromcondensationbyasilicone-
based gel coating; allows use in applications where condensation may occur.
All products are designed and manufactured according to ISO 9001 standards.
stability • accuracy • flexibility • small size
Features
• ProprietaryHoneywelltechnology
• Protectedbymultipleglobalpatents
• Industry-leadinglong-termstability:±0.25%FSS
• TotalErrorBand(TEB):±1.5%FSS
• Industry-leadingaccuracy:±0.25%FSSBFSL
• Highburstpressures
• Industry-leadingflexibility
• Widepressurerange:60mbarto10bar|6kPato1MPa|1psito150psi
• MeetsIPC/JEDECJ-STD-020D.1MoistureSensitivityLevel1requirements
• Optionalinternaldiagnosticfunctions
• Energyefficient
• Output:ratiometricanalog;I
2
C- or SPI-compatible 14-bit digital output
(min. 12-bit sensor resolution)
• Smallsize:Assmallas8mmx7mm
• REACHandRoHScompliant
• Sleepmodeoption(seeTechnicalNote)
• Temperatureoutputoption
• Liquidmediaoption
,
Table of Contents
General Specifications ...................3
Operating Specifications .................4
Transfer Function Limits ..................5
Nomenclature and Order Guide ............6
Pressure Range Specifications .......... 7-8
PCB Layouts ...........................8
Dimensional Drawings:
DIP Packages ...................... 9-10
SMT Packages ....................11-12
Leadless SMT Packages ...............13
Additional Information. . . . . . . . . . . . back page
Potential Applications
MEDICAL
• CPAP
• Bloodanalysis
• Bloodpressuremonitoring
• Breastpumps
• Drugdosing
• Hospitalbeds
• Massagemachines
• Oxygenconcentrators
• Patientmonitoring
• Sleepapneaequipment
• Urineanalyzers
• Ventilators/portableventilators
• Woundtherapy
INDUSTRIAL
• Airbrakes
• HVAC/transmitters
• Lifesciences
• Materialhandling
• Pneumaticcontrol
• Pneumaticregulator
• Processgasmonitoring
• Valvepositioningandpositioners
COMMERCIAL
• Airbeds
• Coffeemakers
• Washingmachines