Product Manual
Table Of Contents
- 1. Standard Contents
- 2. General Information
- 3. User Interface & Display Overview
- 4. BLE (Bluetooth Low Energy) Operation
- 5. Battery
- 6. Turning The Honeywell BW Solo On & Off
- 7. Navigation
- 8. Navigation: Information Menu
- 9. Navigation: Settings
- 10. Zeroing
- 11. Bump Testing
- 12. Calibrating
- 13. Replacing The Filter & Sensor
- 14. Maintenance
- 15. Firmware Update
- 16. Year Of Manufacture
- 17. Sensors & Settings
- 18. Troubleshooting
- 19. Honeywell BW Solo Specifications
- 20. Limited Warranty and Limitation of Liability
Honeywell BW Solo User Manual
25
9. Navigation: Settings
The menu in Settings provides access to adjust settings. It has the following submenus:
• Language
• Time
• Date
• Units
• Readings
• Setpoints
• Latching
• Reminders
• Data Log*
• BLE (wireless versions only)*
• Assigned*
• Zone*
• IntelliFlash
• Non-compliance
• Code
• Exit
* Not included on the BW Solo Lite version. Also, the Mute function under Latching is not included
on the BW Solo Lite.
9.1. Enter Settings Menu
Note: A Code (passcode) can be required to access the Settings menu. Setting an access
restriction can be done using the Code submenu or by using an IntelliDoX with SafetySuite
software.
To enter Settings from the main reading screen:
• Press the button twice in rapid succession. You should see “>Information”.
• Press the button again, four times, to reach “>Settings”.
• Press and hold the button for 1 second. You should see “>Language”. This is the first editable
setting.
Note: If a passcode is required, input the 4-digit passcode (see section 9.17 for details). The
instrument does not have this feature enabled out of the box.