Product Manual

ManualsBrandsHoneywell ManualsGas MonitoringCarbon Monoxide Detector

Table Of Contents

1. Standard Contents
2. General Information
3. User Interface & Display Overview
- 3.1. Out-Of-Box Experience (First Time Use Only)
- 3.2. Status Indicator Icons
4. BLE (Bluetooth Low Energy) Operation
- 4.1. BLE Icons
- 4.2. Non-Compliance Indicator LEDs
- 4.3. Pairing With Smartphones
5. Battery
- 5.1. Battery Status
- 5.2. Battery Replacement
6. Turning The Honeywell BW Solo On & Off
- 6.1. Turning The Honeywell BW Solo On
- 6.2. Turning The Honeywell BW Solo Off
- 6.3. Calibration Status
- 6.4. Bump Status
- 6.5. Sensor Fault Status
7. Navigation
- 7.1. Glance Navigation
- 7.2. Main Navigation
8. Navigation: Information Menu
- 8.1. Event Log Navigation
9. Navigation: Settings
- 9.1. Enter Settings Menu
  - 9.1.1. Menus & Submenus In Settings
- 9.2. Language
- 9.3. Time
- 9.4. Date
- 9.5. Unit
- 9.6. Readings
- 9.7. Setpoints
- 9.8. Latching
- 9.9. Reminders
  - 9.9.1. Force On or Off for Bump/Cal
    - 9.9.1.1. Force Cal
    - 9.9.1.2. Force Bump
- 9.10. Data Logging
- 9.11. BLE
- 9.12. Assigned
- 9.13. Location
- 9.14. IntelliFlash
- 9.15. Non-Compliance Indicator LEDs
- 9.16. Passcode
- 9.17. Always On
- 9.18. Exit
10. Zeroing
11. Bump Testing
12. Calibrating
13. Replacing The Filter & Sensor
- 13.1. Filter Color Reference
- 13.2. Removing The Cover
- 13.3. Replacing The Filter
- 13.4. Replacing The Sensor
  - 13.4.1. 4-Series Sensor Replacement
  - 13.4.2. 1-Series Sensor Replacement
- 13.5. Reinstalling The Cover
14. Maintenance
- 14.1. Cleaning
- 14.2. Replacing The Alligator Clip
- 14.3. Replacing/Servicing Other Parts
15. Firmware Update
16. Year Of Manufacture
17. Sensors & Settings
18. Troubleshooting
19. Honeywell BW Solo Specifications
20. Limited Warranty and Limitation of Liability

Honeywell BW Solo User Manual

9.1.1. Menus & Submenus In Settings

Each Settings menu has a submenu of editable settings. All are accessed, changed, and saved in

the same way:

1. Press the button once to step from one setting to the next.

2. When you find a setting to edit, hold the button for 1 second. The submenu for that setting is

shown.

3. Press the button once to step from one menu option to the next.

4. When you find the option you want to select, press and hold the button.