Product Manual

ManualsBrandsHoneywell ManualsGas MonitoringCarbon Monoxide Detector

Table Of Contents

1. Standard Contents
2. General Information
3. User Interface & Display Overview
- 3.1. Out-Of-Box Experience (First Time Use Only)
- 3.2. Status Indicator Icons
4. BLE (Bluetooth Low Energy) Operation
- 4.1. BLE Icons
- 4.2. Non-Compliance Indicator LEDs
- 4.3. Pairing With Smartphones
5. Battery
- 5.1. Battery Status
- 5.2. Battery Replacement
6. Turning The Honeywell BW Solo On & Off
- 6.1. Turning The Honeywell BW Solo On
- 6.2. Turning The Honeywell BW Solo Off
- 6.3. Calibration Status
- 6.4. Bump Status
- 6.5. Sensor Fault Status
7. Navigation
- 7.1. Glance Navigation
- 7.2. Main Navigation
8. Navigation: Information Menu
- 8.1. Event Log Navigation
9. Navigation: Settings
- 9.1. Enter Settings Menu
  - 9.1.1. Menus & Submenus In Settings
- 9.2. Language
- 9.3. Time
- 9.4. Date
- 9.5. Unit
- 9.6. Readings
- 9.7. Setpoints
- 9.8. Latching
- 9.9. Reminders
  - 9.9.1. Force On or Off for Bump/Cal
    - 9.9.1.1. Force Cal
    - 9.9.1.2. Force Bump
- 9.10. Data Logging
- 9.11. BLE
- 9.12. Assigned
- 9.13. Location
- 9.14. IntelliFlash
- 9.15. Non-Compliance Indicator LEDs
- 9.16. Passcode
- 9.17. Always On
- 9.18. Exit
10. Zeroing
11. Bump Testing
12. Calibrating
13. Replacing The Filter & Sensor
- 13.1. Filter Color Reference
- 13.2. Removing The Cover
- 13.3. Replacing The Filter
- 13.4. Replacing The Sensor
  - 13.4.1. 4-Series Sensor Replacement
  - 13.4.2. 1-Series Sensor Replacement
- 13.5. Reinstalling The Cover
14. Maintenance
- 14.1. Cleaning
- 14.2. Replacing The Alligator Clip
- 14.3. Replacing/Servicing Other Parts
15. Firmware Update
16. Year Of Manufacture
17. Sensors & Settings
18. Troubleshooting
19. Honeywell BW Solo Specifications
20. Limited Warranty and Limitation of Liability

Honeywell BW Solo User Manual

1. If the sensor is a 4-Series type, align the electrodes with the sockets on the printed circuit

board and gently push it into place.

2. Place the sealing ring over the sensor, followed by the sensor frame. Align the frame so that

it fits properly around the audible alarm port. Tighten the screws to hold the frame in place.

Note: Do not overtighten.

Install a new filter over the sensor before replacing the cover.

Sealing

Ring

Sensor

Frame

Sensor

Sealing

Ring

Sensor

Frame

Filter

Cover