Wireless System Installation Instructions

RedLINK™ Installation Guide (TrueZONE™)
69-2090EFS—07 6
M28487
1
0
Next
Back
Done
Customize thermostat (installer setup)
4
Function Setting
Press s or t to change setting
(see tables on pages 7-9)
Press next to display next
function screen
Press done to save & exit.
Follow the steps below to begin installer setup. At each function screen, press
s or t to change the setting as desired, then press next to advance to the next
function screen.
See tables on pages 7-9 for a description of options for each function.
FAN
M28485
To begin, press and hold the fan and s buttons
until the display changes (about 3 seconds).
Exit wireless setup
3
Press connect at the wireless adapter to exit wireless setup (light should stop
flashing).
Note: The wireles adapter will automatically exit wireless setup after 15 minutes of
inactivity.
Note: If installing more than one zone panel, you must exit wireless setup before installing an
additional zone panel.
M28498
0
1
Next
Back
Done