Operation Manual

15
To temporarily raise or lower the
temperature for the current period
only.
If you change your mind.
WARMER
COOLER
TUE
LEAVE
PM
SET
PT
RUN
PROGRAM
AHEAD
BACK
RUN
PROGRAM
WARMER
COOLER
SLEEP
WAKE
LEAVE
RETURN
DAY
Press and hold until the desired
temperature is reached. The display
will flash TEMPORARY until the next
programmed time period starts.
Press and release to cancel any of
the temporary settings.
Press and release the desired period
key.
Press and hold until the desired day
schedule shows on the display.
PERMANENTLY CHANGING THE
PROGRAM
If your schedule changes or you
want a different temperature, you
can update any setting without
affecting the rest of the program.
Press and hold the Time or Tem-
perature keys until the display shows
the desired new program.
Press and release to return to
normal operation.
OPERATING THE THERMOSTAT
MANUALLY
This feature lets you set one
temperature that the thermostat will
hold continuously. Your preset
schedule will resume when you
push the RUN PROGRAM key.
Press and release.
Press and hold to change the
temperature setting. After a few
seconds, the display will show the
current temperature.
Press and release to check the
temperature setting.
Press and release to cancel hold.
ON HEAT
SET
PT
ON HEAT
SET
PT
PRESENT
SETTING
RUN
PROGRAM
HOLD
TEMP
WARMER
COOLER
ON HEAT
SET
PT
OPERATING YOUR THERMOSTAT
TUE
LEAVE
PM
16