Operation Manual

4
3
Program the LEAVE time and
temperature, if desired.
NOTE: You can cancel the LEAVE,
RETURN or SLEEP program by
holding down the key until the
time and temperature disappear
from the display.
PROGRAMMING YOUR THERMOSTAT
AHEAD
BACK
WARMER
COOLER
WARMER
COOLER
MON TUE WED THU FRI ON HEAT
LEAVE
SET
PT
LEAVE
MON TUE WED THU FRI ON HEAT
LEAVE
AM
SET
PT
MON TUE WED THU FRI ON HEAT
LEAVE
AM
SET
PT
Press and release. The display
shows LEAVE, but no time or
temperature.
Press and hold until the display
shows the desired starting time.
Press and hold until the display
shows the desired temperature.
Program the RETURN time and
temperature, if desired.
Press and release. The display
shows RETURN, but no time or
temperature.
Press and hold until the display
shows the desired starting time.
T8631A using Conventional Recov-
ery ( ■ ■ visible in display) should be
set 30 or more minutes ahead of
desired comfort time.
Press and hold until the display
shows the desired temperature.
AHEAD
BACK
RETURN
MON TUE WED THU FRI ON HEAT
RETURN
SET
PT
MON TUE WED THU FRI ON HEAT
RETURN
PM
SET
PT
Press and hold until the display
shows the desired temperature.
If the display starts to blink while
you are holding down TEMPERA-
TURE WARMER or COOLER, you
have reached the setting limit.
MON TUE WED THU FRI ON HEAT
WAKE
AM
SET
PT
WARMER
COOLER
MON TUE WED THU FRI ON HEAT
RETURN
PM
SET
PT
Press and release. The display
shows SLEEP, the preprogrammed
time and temperature.
Press and hold until the display
shows the desired starting time.
SLEEP
Program the SLEEP time and
temperature, if desired.
MON TUE WED THU FRI ON HEAT
SLEEP
PM
SET
PT
AHEAD
BACK
MON TUE WED THU FRI ON HEAT
SLEEP
PM
SET
PT