Operation Manual

7
8
PROGRAMMING YOUR THERMOSTAT
STEP 3
SETTING THE COOLING
TEMPERATURES
The program times are the same
for both heating and cooling. Only
the cooling temperatures need to
be programmed if you have already
programmed for heating. If you
change program times for cooling,
you are also changing them for
heating! To set times as you
program the cooling temperatures,
use the TIME AHEAD and BACK
keys as described in Step 2.
First program the WAKE tempera-
ture for weekdays.
WAKE
Press and release. The display
shows WAKE, the time and tempera-
ture you programmed for heating.
Press and release so COOL shows
on the display, along with the
programmed cooling temperature.
If display reads SAT or SUN, press
and hold until MON TUE WED THU
FRI appears.
SET
HEAT/COOL
DAY
SUN ON HEAT
WAKE
AM
SET
PT
MON TUE WED THU FRI COOL
WAKE
AM
SET
PT
SUN COOL
WAKE
AM
SET
PT
Press and hold until the display
shows the desired temperature.
If the display blinks while you hold
down TEMPERATURE WARMER or
COOLER, you have reached the
setting limit.
WARMER
COOLER
MON TUE WED THU FRI COOL
WAKE
AM
SET
PT
Press and release. The display
shows LEAVE, the time programmed
for heating and 78° F.
Press and hold until the display
shows the desired temperature.
Program the LEAVE temperature, if
desired.
LEAVE
MON TUE WED THU FRI COOL
LEAVE
AM
SET
PT
MON TUE WED THU FRI COOL
LEAVE
AM
SET
PT
WARMER
COOLER
Program the RETURN tempera-
ture, if desired.
RETURN
Press and release. The display
shows RETURN, the time pro-
grammed for heating and 78° F.
MON TUE WED THU FRI COOL
RETURN
PM
SET
PT