User Manual

3EN
ROOM COOLING AND HUMIDIFYING
In cooling mode, Honeywell Air Coolers provide moisturized air
through the evaporation of water. There is a manual Water Regulator
knob located in the ice compartment of the unit. This allows you to
adjust the amount of water pumped over the Honeycomb Cooling
Media, thus helping to control cooling and humidification levels.
When the Water Regulator is set to MIN, the water pump distributes
a minimal amount of water to the Honeycomb Cooling Media. This
results in less water evaporation and reduces the cooling effect.
When the Water Regulator is set to MAX, the water pump distributes
the maximum amount of water to the Honeycomb Cooling Media. This
results in maximum water evaporation and the cooling performance
improves.
Water Regulator
MAX
MIN
TIMER
Press the TIMER button until the desired time duration setting is selected. When the set time
has passed, the unit will automatically turn off (unit remains in Standby mode until power cord is
unplugged from electrical socket). The TIMER function allows you to program the unit for up to 7.5
hours of use.
USE & OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)