Portable Evaporative Air Cooler OWNER’S MANUAL Read and save these instructions before use Model: CO30PM For product enquiry or support contact : CUST OMER CARE : www.honeywellaircoolers.com e-mail: info@honeywellaircoolers.com Voltage rating: 220~240V / 50Hz Power Rating: 270W Made in China.
This page is intentionally left blank
INDEX Read all instructions carefully before setting up and operating the unit, and please keep this instruction manual for future reference. This manual is designed to provide you with important information needed to setup, operate, maintain, and troubleshoot your cooler. Failure to follow these instructions may damage and/or impair its operation and void the warranty. SECTION 1. 2. 3. 4. 5. 6. 7. 8. 9. PAGE THANK YOU .....................................................................................
THANK YOU THANK YOU! Congratulations on your purchase of this versatile Honeywell Evaporative Air Cooler. For optimum cooling performance from your unit, fill the water tank with water & ice (if available) to increase its cooling power. Please read these instructions carefully.
USER TIPS COOL ~ EFFICIENT ~ NATURAL Evaporative air cooling is the natural way of cooling, similar to a breeze blowing across a lake. This breeze drops the temperature and has a relaxing cooling effect. The evaporative air cooler cools the air by means of the evaporation of water. When water evaporates into the air, the result is a mixture of air and water molecules. This chemical change requires heat which is taken from the water molecules, resulting in cooler air propelled from the unit.
USER TIPS The recommended maximum relative humidity level is 60% or less, which allows a noticeable temperature decrease. The temperature decrease will be greater in drier climates because higher evaporation occurs when the humidity is low. The evaporative air cooler should not be used in enclosed spaces. It must be kept level and there must be water in the water tank. The room should have doors and windows opened to allow free air flow.
SAFETY RULES READ AND SAVE THESE INSTRUCTIONS: When using electrical appliances, basic safety precautions should always be followed: • Your cooler runs on 220~240 Volt AC, 50 Hz current. Check the household voltage to ensure it matches the appliance's rate specification. • Before operating the product remove it from its packaging and check it is in good condition. • DO NOT operate any product with a damaged cord or plug. We recommend not using an extension cord with this appliance.
SAFETY RULES • DO NOT attempt repair or adjust any electrical or mechanical functions of the cooler, as this may void the warranty. • DO NOT cover the air inlet or outlet on the appliance as this may cause motor damage. • DO NOT insert or allow objects to enter any ventilation or exhaust opening as this may damage the product and could cause an electrical shock or fire. • DO NOT operate with the Honeycomb media removed as this will overload and damage the motor.
PARTS DESCRIPTION 1 11 2 12 3 14 4 5 7 15 16 8 9 10 6 17 1. Horizontal Louvers (Manual Adjustment) 2. Cylinder 3. Speed HIGH / LOW Knob 4. Front Upper Panel 5. Front Inlet Panel 6. Castors 7. Left Side Panel 8. Garden Hose Connection 13 9. 10. 11. 12. 13. 14. 15. 16. 17.
ASSEMBLY INSTRUCTIONS CO30PM and CO45PM are ready to be used out of box. Some models come with float valve factory installed. With float valve and hose adapter installed, you will enjoy continuous fill without manually filling the reservoir with water. For installation or adjustment of float valve, follow the instructionbelow. • Remove the rear panel by removing two screws and lifting the rear panel away. (Fig.
USE & OPERATION FILL WATER Units supplied without Continous Fill Feature: • Open the water fill door located to the right side of the unit. Pour water through the water fill door, and fill the tank, till it reaches the Max. Level. • Check Max. Level of water on the Water Level Indicator. Always check water level in the tank before running the "COOL" function. • Always make sure water in the tank is above the Min. Water level mark. • Running the unit with inadequate water may cause pump failure.
USE & OPERATION OPERATING THE UNIT FAN SWITCH: The knob marked to the right of the unit is for changing speed from high to low and switching the unit off. Turn downwards for Low speed. Turn upwards for High speed. The center position is for switching the unit off. COOL: The knob marked to the left of the unit is for switching the pump on or off for cooling. On position the pump will work and produce cool humid air from the unit. On off position the unit will work like a fan.
USE & OPERATION OPERATING INSTRUCTIONS • Fill the tank manually or after hose connection is made, turn on the water supply to the cooler. • The hose connection to the float valve provides an automatic method of refilling the water supply as water is evaporated. Whenever possible operate the blower fan at low speed for maximum cooling. • When cooling is not required you can operate the unit as a fan only by turning on the fan and leaving the pump turned off.
CLEANING & MAINTENANCE WARNING • Before cleaning the unit, switch it to the ''OFF'' position and remove the plug from the power socket. • To clean the outside, use a damp cloth to remove dirt and dust. • Never use detergents, corrosive elements or any chemicals to clean this product. • When the product is not in use, store the unit in a dry place out of direct sunlight. • If you do not intend to use the product for some time, empty the water tank.
CLEANING & MAINTENANCE CLEANING THE FILTER Periodic draining of the tank will help reduce the build-up of calcium deposits on the pads. Periodic cleaning of pads will also help increase the life of the pads and the cooling performance of the cooler. Do not attempt to clean the pads while they are installed in the pad frames or in the cooler. They must be completely removed from the cooler and then can be hosed off and lightly brushed to remove or reduce the calcium build-up.
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION No discharge of air Cord is not plugged in. Make sure power cord is plugged in and the supply switch in ON. Power is not on. Try to turn the unit ON by pressing buttons on control panel or remote control. Pump is not turned ON. Turn on COOL function from remote or control panel. Low or no water in tank, when COOL is selected. Refill water tank. Damaged Pump or Calcium deposits on blower. Contact service centre. New Unit.
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION The unit does not respond Remote control batteries. Check batteries, Replace if needed. Try to operate using the control panel. Damaged PCB Try with remote control. If the unit responds, PCB board fasteners may be loose. Contact service centre. If neither remote control nor control panel works, PCB board may be damaged. Contact service centre.
TECHNICAL SPECIFICATIONS MODEL NO.
SERVICE AND WARRANTY SERVICE AND WARRANTY • Do not operate the unit with a damaged cord or plug , after the unit malfunctions, has been dropped or damaged. • For your convenience, record the complete model number and product name (Located on the Product Identification Plate), the date you purchased the product and attach your purchase receipt as proof of purchase.
AirTek International Corporation Limited Suite 806-807A, West Wing, IM02-CO30PM-UK-2010-05 Tsim Sha Tsui Centre, 66 Mody Road, May 2010 Tsim Sha Tsui East, Kowloon, Hong Kong © 2010 AirTek International Corporation Limited The Honeywell Trademark is used under license from tel: +852 2559-5522 Honeywell International Inc. fax: +852 2559-0699 Honeywell International Inc. makes no representation or warranties with respect to this product. e-mail: info@honeywellaircoolers.
