Portable Evaporative Air Cooler OWNER’S MANUAL Read and save these instructions before use Ideal for Indoor / Outdoor use TIMER SWING POWER SPEED COOL Model: CO45PC For product enquiry or support contact : CUST OMER CARE : www.honeywellaircoolers.com e-mail: info@honeywellaircoolers.com Voltage rating: 220-240 Volt AC, 50Hz Power rating: 350 Watts Made in China.
This page is intentionally left blank
INDEX Read all instructions carefully before setting up and operating the unit, and please keep this instruction manual for future reference. This manual is designed to provide you with important information needed to setup, operate, maintain, and troubleshoot your cooler. Failure to follow these instructions may damage and/or impair its operation and void the warranty. SECTION 1. 2. 3. 4. 5. PAGE THANK YOU ..................................................................................................
THANK YOU THANK YOU! Congratulations on your purchase of this versatile Honeywell Evaporative Air Cooler . For optimum cooling performance from your unit, fill the water tank with water & ice (if available) to increase its cooling performance.. The unit should be positioned in a location that will create a 'flow through' air effect.The greatest cooling effect will be felt if the unit is operated in a partly opened doorway or window. Please read these instructions carefully.
USER TIPS NATURAL ENERG Y EFFICIENT COOLING .. Evaporative air cooling is the natural way of cooling, similar to a breeze blowing across a lake. This breeze drops the temperature and has a relaxing cooling effect. The evaporative air cooler cools the air by means of the evaporation of water. When water evaporates into the air, the result is a mixture of air and water molecules. This chemical change requires heat which is taken from the water molecules, resulting in cooler air propelled from the unit.
USER TIPS The recommended maximum relative humidity level is 60% or less, which allows a noticeable temperature decrease. The temperature decrease will be greater in drier climates because higher evaporation occurs when the humidity is low. The evaporative air cooler should not be used in enclosed spaces. It must be kept level and there must be water in the water tank. The room should have doors and windows opened to allow free air flow.
SAFETY RULES READ AND SAVE THESE INSTRUCTIONS: When using electrical appliances, basic safety precautions should always be followed: • Your unit runs on 220-24 0 Volt AC, 50 Hz current. Check the household voltage to ensure it matches the appliance's rate specification. • Before operating the product remove it from its packaging and check it is in good condition. • DO NOT operate any product with a damaged cord or plug. We recommend not using an extension cord with this appliance.
SAFETY RULES • DO NOT attempt repair or adjust any electrical or mechanical functions of the cooler, as this may void the warranty. • DO NOT cover the air inlet or outlet on the appliance as this may cause motor damage. • DO NOT insert or allow objects to enter any ventilation or exhaust opening as this may damage the product and could cause an electrical shock or fire. • DO NOT operate with the Honeycomb media removed as this will overload and damage the motor.
PARTS DESCRIPTION 1 11 8 2 TIMER SWING POWER SPEED 12 COOL 3 15 9 5 10 6 7 13 17 4 1. Air Vent / Outlet 2. Control Panel 3. Front Honeycomb Panel 4. Front Castors 5. Left Side Panels 6. Water Tank 7. Rear Wheels 8. Right Side Panel 4 16 9. Water Level Indicator 10. Water Fill Door 11. Top Panel 12. Backside Honeycomb Panel 13. Water Overflow Hole 14. Water drain plug 15. Power Cord 16. Rating Label 17.
USE & OPERATION OPERATING THE UNIT TIMER: Press the TIMER button until the indicator light moves to your desired time. Once the set time has passed, the unit will automatically shut off. The Timer function allows you to program the unit for up to 8 hours of use. TIMER SWING: Press the ''SWING'' button. The indicator light will come on and the louvers will begin to move from right to left automatically. POWER: Press the 'POWER' button to turn the unit on. To turn the unit off, press the button again.
USE & OPERATION FILL WATER ( Continuous Water Supply Connection) • Connect a garden hose to the hose adapter securely. Make sure hose adapter seal washer is evenly set inside the adapter. • Connect water supply to the garden hose, and turn on water supply. • Water inside the tank will automatically refill once, it reaches the Min. Level. • Similarly, the water supply to the tank will stop, once the tank is full, and reaches Max. Level.
USE & OPERATION FILL WATER ( Manually ) • Open the water fill door located to the right side of the unit. Pour water through the water fill door, and fill the tank, till it reaches the Max. Level. • Check Max. Level of water on the Water Level Indicator. Always check water level in the tank before running the "COOL" function. • Always make sure water in the tank is above the Min. Water level mark. • Running the unit with inadequate water may cause pump failure.
USE & OPERATION LOW WATER ALARM FUNCTION The unit is equipped with a low water sensor. When water in the tank is below the minimum level, you will hear 10 beeps and the COOL LED indicator will flash continuously. At the same time the power to the pump inside the unit will be cut off to protect the life of the pump. To disengage the alarm function, turn off and unplug the unit from the power outlet, and fill the tank with water above the minimum level.
CLEANING & MAINTENANCE WARNING • Before cleaning the unit, switch it to the ''OFF'' position and remove the plug from the power socket. • To clean the outside, use a damp cloth to remove dirt and dust. • Never use detergents, corrosive elements or any chemicals to clean this product. • When the product is not in use, store the unit in a dry place out of direct sunlight. • If you do not intend to use the product for some time, empty the water tank.
CLEANING & MAINTENANCE CLEANING THE FILTER Periodic draining of the tank will help reduce the build-up of calcium deposits on the pads. Periodic cleaning of pads will also help increase the life of the pads and the cooling performance of the cooler. Do not attempt to clean the pads while they are installed in the pad frames or in the cooler. They must be completely removed from the cooler and then can be hosed off and lightly brushed to remove or reduce the calcium build-up.
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION Cooler not operating Initially. Cord is not plugged in. Make sure power cord is plugged in and the supply switch in ON. Power outlet or supply faulty. Check the power outlet. Check the power supply. I ncorrect Voltage. Check that the power supply is the same as specified on the rating label. Cord is not plugged in. Make sure power cord is plugged in and the supply switch in ON. Power is not on.
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION The unit does not respond Remote control batteries. Check batteries, Replace if needed. Try to operate using the control panel. Damaged PCB Try with remote control. If the unit responds, PCB board fasteners may be loose. Contact service centre. If neither remote control nor control panel works, PCB board may be damaged. Contact service centre. Odour omission New Unit.
TECHNICAL SPECIFICATIONS MODEL NO. CO45PC Voltage Frequency Wattage Water Tank Capacity Cooling Media Product Dimension Net Weight 220V- 240V 50Hz 350 Watts 45 Litre Honeycomb 770(L) x 617(W) x 1087(H) mm 37.
AirTek International Corporation Limited Suite 806-807A, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong tel: +852 2559-5522 fax: +852 2559-0699 e-mail: info@honeywellaircoolers.com www.honeywellaircoolers.com July 2010, IM02 - CO45PC - 2010 - 07 © 2010 AirTek International Corporation Limited The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representation or warranties with respect to this product.
