Operation Manual

TROUBLESHOOTING GUIDE
No discharge of air Cord is not plugged in.
Make sure power cord is plugged
in and the supply switch in ON.
Power is not on.
Not Cooling / Unit is
making noise
Pump is not turned ON.
Turn on COOL function from
control panel.
Low or no water in tank,
when COOL is selected.
Refill water tank.
Odour omission New Unit.
Old Unit.
Damaged Pump or
Calciumdeposits on blower.
Contact service centre.
PROBLEM POSSIBLE CAUSE SOLUTION
Try to turn the unit ON by
changing the operation
settings of manual knobs on
the control panel.
When the unit is used for
thefirst time, the Honeycomb
cooling media will have an
odour, which will dissipate
within a week of initial use.
There may be an algae
issue,Replace the honeycomb
cooling media. Contact
service centre.
13