Use and Care Manual

120V - 60 Hz

Shock Hazard

Water Level Indicator

MAX

MIN

OFF

COOL

OFF

SWING

Your cooler runs on 120 Volt AC, 60 Hz current. Check the

household voltage to ensure it matches the appliance's rate

specification.

Before operating the product remove it from its packaging

and check that it is in good condition.

DO NOT operate any product with a damaged cord or plug.

We recommend not using an extension cord with this appli-

ance.

DO NOT run power cord under carpeting, or cover it with

rugs or runners. Keep the cord away from areas where it may

be tripped over.

Always unplug the product before refilling the water tank.

Always unplug the appliance from the power source before

cleaning, servicing or relocating the unit.

Remove the power cord from the electrical receptacle by

grasping and pulling on the power cord plug-end only, never

pull the cord.

DO NOT use the product in areas where gasoline, paint or

other flammable goods and objects are stored.

When using the ''COOL'' setting, check the water tank to

ensure that it is full. Operation of this cooler on the ''COOL''

setting with an empty tank may result in damage to the water pump.

Read And Save These Instructions:

When using electrical appliances, basic safety precautions should always be followed:

•

Warning: To reduce the risk of fire or electric shock, do not use this appliance with any solid-

state speed control device.

•

SAFETY ENG