Submittal Sheet

ManualsBrandsHoneywell ManualsCurrent SensorsFixed Split Core, N/O, Current Switch, 0.35-200A

Table Of Contents

PRODUCT DATA

31-00453-02

CS, CSP, MCS Current Switches

and CR Relays

CURRENT SWITCHES: MCS, CS

& CSP

Features

APPLICATION

• Detecting mechanical failure on fans and pumps

• Monitoring status of industrial processes and critical

motors

CS SERIES

• Same benefits as CSP current switch with a more-

compact package

• Low amperage detection

• Solid core; fixed and adjustable

CSP SERIES

• Prior to installation, the current threshold is preset

thereby allowing the installer to avoid electrical hazards

when adjusting in presence of line voltage

• Lowest installed cost

• No need to return to job site to calibrate

• Save approximately 30 minutes time for each sensor

install

• Split core; fixed and adjustable

• Optional command relay

MCS SERIES (MINI-ADJUSTABLE)

• Ultra small, fits almost anywhere

• Low amperage detection

• Solid core; adjustable

CURRENT RELAYS: CR SERIES

A Key Accessory for both current switches and

transmitters.

• Designed to be added to the CSP or CTP Series to

provide start/stop status in a single device

• Reduces number of installed components

• Simple, integral switch attachment

CR SERIES RELAY

Summary of content (4 pages)

PAGE 1
CS, CSP, MCS Current Switches and CR Relays PRODUCT DATA CURRENT SWITCHES: MCS, CS & CSP Features APPLICATION • Detecting mechanical failure on fans and pumps • Monitoring status of industrial processes and critical motors CS SERIES • Same benefits as CSP current switch with a morecompact package • Low amperage detection • Solid core; fixed and adjustable CSP SERIES • Prior to installation, the current threshold is preset thereby allowing the installer to avoid electrical hazards when adjusting in presence
PAGE 2
CS, CSP, MCS CURRENT SWITCHES AND CR RELAYS SPECIFICATIONS Table 1. CS/CSP/MCS SERIES CURRENT SWITCHES Model Number Trip Point Core Type Max. Current Application Adjustable, 0.75-50FLA Micro-Solid 50A Standard CS-NO-F-50A Fixed, 0.25A Solid 50A Standard CS-NO-A-50A Adjustable, 0.75-50FLA Split 50A Standard MCS-NO-A-50A CSP-NO-A-50A Adjustable, 0.45-50FLA Split 50A Standard CSP-NO-A-100A Adjustable, 0.50-100FLA Split 100A Standard CSP-NO-A-150A Adjustable, 0.
PAGE 3
CS, CSP, MCS CURRENT SWITCHES AND CR RELAYS SPECIFICATIONS Maximum surrounding air ambient, 60 ° C. For use in Pollution Degree 2 Environment. Fixed Current Switches Adjustable Current Switches Output Type NO, solid-state FET Turn-on Amperage CSP-NO-AVFD-150A 1A(30Hz min), 1.5A(20Hz min), 2.5A(10Hz min) Output Rating 1.0A@30VAC/DC Max. Output Type NO, solid-state FET Temperature Rating -15~60 ° C Temperature Rating -15~60 ° C Insulation Class 600V RMS.
PAGE 4
CS, CSP, MCS CURRENT SWITCHES AND CR RELAYS Honeywell Building Technologies In the U.S.: Honeywell 715 Peachtree Street NE Atlanta, GA 30308 customer.honeywell.com ® U.S. Registered Trademark ©2020 Honeywell International Inc. 31-00453—02 M.S.