User's Guide

Download Guide – Dubai Android
Copyright ©
2017
Honeywell
. All rights reserved
.
Honeywell Confidential and Proprietary Revision 11 – Draft Page 15 of 31
2 、
、、
、 Only for CN80
 SZ:
http://artifactory.android.honeywell.com:8080/artifactory/libs-snapshot-
local/Honeywell/CN80Android/nougat-master/QFIL/
 US:
\\de08st2702\hsm\ENG-MOB-SWImages\DubaiAndroid\Nightly_Builds\CN80Android\nougat-master\QFIL
 USI:
sftp://[e-mail]:/Honeywell/CN80Android/nougat-master/QFIL/
3 、
、、
、 Only for CT60
 SZ:
http://artifactory.android.honeywell.com:8080/artifactory/libs-snapshot-
local/Honeywell/CT60Android/nougat-master/QFIL/
 US:
\\de08st2702\hsm\ENG-MOB-SWImages\DubaiAndroid\Nightly_Builds\CT60Android\nougat-master\QFIL
 USI:
sftp://[e-mail]:/Honeywell/CT60Android/nougat-master/QFIL/
3.3.2 How to Enter QLOADER mode
We have two ways to enter QLOADER mode that Command Enter & Short Enter.
Please choose the convenience method to enter the QLOADER mode.
3.3.2.1 adb Command to Enter QLOADE Mode
If the device can enter Android system, use adb command to make device enter QLOADER mode. The adb user
manual is in Charpter 4. Input adb command:
adb reboot edl (For all Hon660 devices )
After enter QLOADER mode, go to Charpter 3.3.3 to download emergency package into device.
3.3.2.2 Short FORCE_USB_BOOT pins to Enter QLOADER Mode
This Document is applicable to different Hon660 devices. But the short method is different.
So User need to pay attention to different short methods(CN80 &CT60)
If the device cannot enter Android system or the device seems dead, please use the pin header to short the
FORCE_USB_BOOT pins as below in device power off state. After that, Connect the device to the PC By USB and
let it enter QLOADER mode. (disconnect the usb from PC before short to ensure enter QLOADER success). The
following is the detail steps: