DCP552 Mark II Digital Control Programmer User's Manual

7
DCP552 Parameter Work Sheet
Event Meaning Setting Operation Auxiliary settings
type category category
24 to 63 Event off ----- ----- Auxiliary 1 : None Auxiliary 2 : None
64 Normal PV1 upper limit operation Measuring instrument PV Auxiliary 1 : Hysteresis Auxiliary 2 : Operating point
65 Normal PV1 lower limit operation
66 Normal PV2 upper limit operation
67 Normal PV2 lower limit operation
68 PV upper limit
69 PV lower limit
70 Deviation upper limit
71 Deviation lower limit
72 Deviation upper limit with standby
73 Deviation lower limit with standby
74 Absolute value deviation upper limit
75 Absolute value deviation lower limit
76 Absolute value deviation upper limit with standby
77 Absolute value deviation lower limit with standby
78 PV deviation rate upper limit Measuring instrument PV Auxiliary 1 : Sampling cycle Auxiliary 2 : Operating point
79 PV deviation rate lower limit
80 SP upper limit Measuring instrument PV Auxiliary 1 : Hysteresis Auxiliary 2 : Operating point
81 SP lower limit
82 MV upper limit
83 MV lower limit
84 SOAK absolute value deviation upper limit
85 SOAK absolute value deviation lower limit
86 SOAK absolute value deviation upper limit with standby
87 SOAK absolute value deviation lower limit with standby
88 Program No. binary code Measuring instrument Code Auxiliary 1 : No. of output Auxiliary 2 : None
89 Segment No. binary code
90 Program No. BCD code
91 Segment No. BCD code
92 Specified segment Measuring instrument Mode Auxiliary 1 : Segment specification Auxiliary 2 : None
93 RAMP-E monitoring time Measuring instrument Time Auxiliary 1 : Operating point Auxiliary 2 : None
94 Segment time Measuring instrument Time Auxiliary 1 : On-time Auxiliary 2 : OFF-time
95 Program time
96 to 127 Event off ----- ----- Auxiliary 1 : None Auxiliary 2 : None
128 RUN, HOLD, END, FAST Measuring instrument Mode Auxiliary 1 : Depends on channel conditions
129 HOLD Auxiliary 2 : None
130 READY, READY FAST
131 END
132 G.SOAK wait
133 MANUAL
134 AT executing
135 FAST, READY FAST
136 Console setting operation Measuring instrument Mode Auxiliary 1 : None Auxiliary 2 : None
137 RUN Measuring instrument Mode Auxiliary 1 : Depends on channel conditions
138 Advance Auxiliary 2 : None
139 All alarms (logical OR) Measuring instrument Mode Auxiliary 1 : None Auxiliary 2 : None
140 PV range alarm
141 Instrument alarm
142 O
2 sensor error