Instructions / Assembly

USE & OPERATION (CONTINUED)

FUNCTION BUTTONS

MODE

Press the button to select your desired wind type: Natural - Sleep - Normal .

POWER

Press the to turn the unit on. The cooler will start automatically at Ultra Low speed.

To turn the unit off, press button again.

SPEED

Press the button repeatedly to change the speed between Ultra Low (I) – Low (II) - Medium (III) -

High (IV). The indicator light will show the selected speed.

SWING

Press the button until is illuminated on the display screen. The louvers will begin to move

left to right automatically. You can manually adjust the louvers to change vertical air ﬂow.

: While the unit is ON, press the button until the desired time duration setting is selected

and the indicator light will show the selected hours on the display screen. When the set

time has been reached, the unit will automatically turn off. The TIMER function allows

you to program the unit for up to 8 hours of use.

: When the unit is OFF, in a Standby Mode, press the button until the desired time

duration setting is selected and the indicator light will show the selected hours on the

display screen. The PRESET function allows you to program the unit for up to 8 hours.

When the preset time has been reached, the unit will automatically turn on. The fan speed

will start at Ultra Low speed.

TIMER / PRESET

TIMER

PRESET

NATURAL

SLEEP

NORMAL

: The fan speed alternates between Ultra Low, Low, Medium & High only.

: When Sleep Mode is selected, the air cooler will operate for 8 hours and the fan speed

will gradually decrease and eventually turn OFF when the 8 hour period is completed.

STAND BY MODE

Once the unit is plugged in, the POWER indicator light will be illuminated.

: You can select either Ultra Low, Low, Medium or High fan speeds.

Note: The Timer cannot be set to repeat automatically. It can only be set once and

needs to be reset again after it completes one cycle.