User`s guide

2 - 1

Getting Started

Out of the Box

Verify that your carton contains the following items:

• Dolphin 7600 mobile computer (the terminal)

• Main battery pack (3.7v, Li-ion)

• AC power supply

• Localized plug adapters

•User CD

Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see Limited

Warranty on page 15-3.

Step 1. Install the Main Battery

We recommend use of Hand Held Products Li-Ion battery packs. Use of any non-Hand Held

Products battery may result in damage not covered by the warranty.

Step 2. Charge the Batteries

We recommend use of Hand Held Products peripherals, power cables, and power adapters. Use of any non-

Hand Held Products peripherals, cables, or power adapters may cause damage not covered by the warranty.

Dolphin terminals ship with both the main battery

pack and internal backup battery significantly

discharged of power. Charge the main battery

pack with the charging cable for a minimum of

four hours before initial use.

1. Attach the appropriate plug adapter to the

plug of the power cable.

2. Plug the *power cable into the DC Power Jack

(see page 3-12) on the left side.

3. Insert the plug into the appropriate power

source.

*This power cable can also be used to power the

Dolphin HomeBase Device (see page 11-1).

Power Cable