User`s guide

13 - 1

Dolphin Mobile Mount

Overview

The Dolphin Mobile Mount provides easy and secure access to the Dolphin terminal in mobile

environments.

We recommend use of Hand Held Products peripherals, power cables, and power adapters. Use of any non-

Hand Held Products peripherals, cables, or power adapters may cause damage not covered by the warranty.

Out of the Box

The Dolphin Mobile Mount ships with

• The plastic mount, which holds one Dolphin 7600 terminal

• A standard, RAM (101-B) mounting bracket with two universal ball joints.

• The nuts and bolts required for installation.

Note: The Dolphin Mobile Mount is not intended for use the imaging/scanning applications.

Inserting a Terminal

Note: It is recommended that you install one of the ball mounts on the back panel before inserting a terminal; see

Mounting on page 13-3.

1. Insert the back panel of a terminal into the Mobile Mount and gently place the lip of the top of the

latch in place at the bottom of the image engine window.

Do NOT pull back on the latch and snap in place! Make sure that the Dolphin terminal is securely

fastened inside the mount but do not use excessive force.

Latch