User`s guide

3 - 12
Side Panel Features
Note: This graphic shows the left side of the terminal.
Access Door
This door covers the memory card slot. To increase memory, install a memory card in this slot.
This terminal supports microSD
™
and microSDHC
™
memory cards. For details, see Installing
Memory Cards on page 3-13.
When closed, the access door seals the memory interface from moisture and particle intrusion
thus preserving the terminal’s environmental rating.
DC Power Jack
The DC power jack receives external power from the power cable that comes in the box with
the terminal. When connected to the power cable, the terminal is powered and the main battery
pack is charging.
For more information, about the power cable, see Connecting the Power Cable on page 3-17.
Headset Jack
This 2.5mm audio jack supports a headset with a mono speaker and microphone.
IrDA Port
The IrDA (Infrared Data Association) port communicates with IrDA-enabled devices such as
PCs, printers, modems, or other Dolphin terminals. Maximum data transfer speed is 115 Kbps.
For more information, see Infrared Communication on page 7-2.
Side Button
There is a button like this on both side panels. By default, these buttons wake the terminal from
suspend mode unless you are in a scanning application, in which case, these buttons activate
the image/scan engine. Scanning with the side buttons can be a more comfortable and
therefore a more ergonomic alternative to pressing the SCAN key on the keyboard.
These buttons can be programmed to launch applications from the Today screen. For more
information about programming these buttons, see Customizing a Hardware Button on page
4-5.
IrDA Port
Side
Button
Headset
Jack
DC Power
Jack
Side Door
Access
Door