User’s Guide ® With Microsoft® Windows Mobile® 5.
Disclaimer Hand Held Products, Inc. (“Hand Held Products”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Hand Held Products to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of Hand Held Products.
Table of Contents Chapter 1 - Agency Approvals Label Locations................................................................................................................................... 1-2 Laser Safety Label ........................................................................................................................ 1-2 LED Safety Statement.........................................................................................................................
Capturing Images.................................................................................................................................4-5 Chapter 5 - Using the Keyboards Overview .............................................................................................................................................5-1 Using the Function Keys .....................................................................................................................5-2 Using the Navigation Keys......
Chapter 7 - Communications Overview .............................................................................................................................................7-1 Installing Additional Software ......................................................................................................7-1 Using ActiveSync ................................................................................................................................7-2 Synchronizing from Your Desktop Computer ....
Bluetooth ActiveSync..........................................................................................................................9-7 Bluetooth LAN Access ........................................................................................................................9-9 OBEX ................................................................................................................................................9-11 Enable File Sharing ...............................................
GPS Demo .........................................................................................................................................11-6 Accessing GPSdemo ...................................................................................................................11-6 Setup Tab ...................................................................................................................................11-6 Position Tab ................................................................
Chapter 15 - Dolphin Mobile Base Overview ...........................................................................................................................................15-1 Dolphin Mobile Base Hardware Overview .......................................................................................15-2 Front Panel ..................................................................................................................................15-2 Bottom Panel.....................................
1 Agency Approvals Overview Congratulations on the purchase of the Dolphin 7900 mobile computer! You have made a wise choice in selecting the Dolphin, a device known worldwide for its ergonomic form factor, light-weight, rugged design and single-handed data collection capabilities. Ergonomics The patented shape of the Dolphin 7900 fits into either hand comfortably with major function keys that are easy to access.
Label Locations Dolphin terminals meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Please read these guidelines carefully before using your Dolphin mobile computer.
FCC Compliance Dolphin 7900 Series terminals comply with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Dolphin 7900 RF Terminal with an 802.11b, Bluetooth, and/or GSM (MC-45, MC-46 & MC-75) Radio This device complies with Part 15 of the FCC Rules.
RF Approvals for 802.11b and Bluetooth Parameter Specification U.S.A. Canada FCC Part 15.247 RSS 210 RF Approvals for GSM (MC-45, MC-46, & MC-75) Parameter Specification U.S.A. Canada FCC Part 24 RSS 133 R&TTE Compliance Statement for 802.11b, Bluetooth, and/or GSM (MC-45, MC-46, & MC-75) Dolphin 7900 RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/EC).
Pacemakers, Hearing Aids and Other Electrically Powered Devices Most manufacturers of medical devices adhere to the IEC 601-1-2 standard. This standard requires devices to operate properly in an EM Field with a strength of 3V/m over a frequency range of 26 to 1000MHz. The maximum allowable field strength emitted by the Dolphin is 0.3V/m according to Subpart B of Part 1 of the FCC rules. Therefore, the Dolphin RF has no effect on medical devices that meet the IEC specification.
1-6 Rev F 10/16/07 Dolphin® 7900 User’s Guide
2 Getting Started Overview The Dolphin 7900 terminal comprises one element of an enterprise data collection system that includes various models, peripherals, and accessories that you can combine to suit your exact needs. The Dolphin 7900 terminal itself combines the latest in multi-functional wireless data and voice communications technology with a unique, compact form factor, which makes it an ideal solution for today’s in-transit applications.
Dolphin 7900 Radio Configuration Options Standard Configurations Dolphin 7900 WLAN and WPAN (802.11b and Bluetooth) This terminal features integrated 802.11b and Bluetooth radios, which means that your terminal contains the capabilities of both radios. You can operate the radios simultaneously or switch between them. Dolphin 7900 WWAN and WLAN (GSM/GPRS and 802.11b) This terminal features the functionality of both GSM/GPRS and 802.11b radio and network technologies.
Dolphin 7900 Series Peripherals Each of the following items is sold separately to enhance your Dolphin 7900 terminal’s capabilities. Dolphin HomeBase™ The Dolphin HomeBase charging and communication cradle supports both RS-232 and USB communications, which enable it to interface with the majority of PC-based enterprise systems. When a terminal is seated in the HomeBase, its main battery pack charges in less than four hours.
Dolphin 7900 Accessories Each of the following items is sold separately to enhance your Dolphin 7900 terminal’s capabilities. Note: When using accessories where the terminal is worn on the body, the terminal’s touch screen must face away from the body. Dolphin Cable Kits USB and serial cables connect the Dolphin 7900 terminal directly to both a peripheral device for communication and a power source for charging.
Using the Dolphin 7900 for the First Time 1. Unpack the Carton and Verify its Contents, page 2-5. 2. Install the Main Battery Pack, page 2-5. 3. Charge the Main and Backup Batteries, page 2-6. 4. Initialize the Mobile Computer, page 2-7. 5. Let Autoinstall Run, page 2-7. 6. Verify Operations with Demos, page 2-8. Step 1. Unpack the Carton and Verify its Contents Verify that the carton contains the following items: • Dolphin 7900 mobile computer (the terminal) • Main battery pack (7.
3. Take the battery and insert the end without the locking tab into the top of the battery well and push down with a hinging motion until the locking tab snaps. 4. Re-attach the handstrap. To Remove the Main Battery Pack Put the terminal in Suspend mode before removing the battery; Suspend Mode, page 2-11. 1. Detach the handstrap. 2. Press the locking tab on the battery pack and pull it away from the bottom panel. 3. Pull the battery pack up with a hinging motion. Step 3.
Step 4. Initialize the Mobile Computer 1. Power on the terminal. The decode LED lights and the scan LED blinks for approximately three seconds. Do NOT press any keys while the terminal is booting up. 2. The terminal initializes and the splash screen appears for a few seconds. The Build numbers indicate the software versions. Bootloader Kernel Keyboard 9.XX/9.XX/9.XX/9.XX Initial Program Loader (IPL) 3. The system performs a hard reset.
Step 7. Setting the Time and Date The time and date need to be reset after every hard reset of the terminal. It is a good idea to set the time and date before you begin using the device, so that the system clock is accurate. On the Today screen, tap the line that displays the time and date, The Clock Settings screen appears. Step 8. Verify Operations with Demos For details, see Using the Image Engine on page 4-1.
Today Screen When the terminal powers one for the first time, you see the Today screen. You can also display it by tapping Start and then Today. On the Today screen, you can see at a glance important information for the day.
Pop-Up Menus With pop-up menus, you can quickly choose an action for an item. For example, you can use the pop-up menu in the contact list to quickly delete a contact, make a copy of a contact, or send an e-mail message to a contact. The actions in the pop-up menus vary from program to program. 1. Tap and hold the stylus on the item name. The pop-up menu appears. 2. Lift the stylus, and tap the action you want to perform.
Resetting the Terminal There are two ways to reset the Dolphin terminal: a soft and a hard reset. Soft Reset (Warm Boot) A soft reset re-boots the device without losing RAM data. You would perform a soft reset when • • • The terminal fails to respond After installing some software applications After making changes to certain system settings, such as network cards 1. Press and hold the Red + ESC keys for approximately five seconds. 2.
2 - 12 Rev F 10/16/07 Dolphin® 7900 User’s Guide
3 Hardware Overview System Features Processor The Dolphin 7900 terminal is equipped with an Intel X-Scale 400MHz RISC microprocessor that runs on a 100 MHz RAM BUS, making it one of the most powerful mobile computers on the market. Operating System Windows Mobile 2003 Second Edition software provides a compact, highly efficient, scalable operating system. The open architecture facilitates the development of applications for energy-efficient data collection devices such as the Dolphin terminal.
Front Panel Features This section describes features on the front panel of the Dolphin 7900 terminal. The following graphic shows a Dolphin 7900 with a 25-key keyboard. Audio Jack Speaker IrDa Port Scan LED Decode LED Touch Screen Display SCAN key Recessed Keyboard SCAN Microphone Navigation keys Audio Jack Dolphin 7900 terminals contain a 2.5mm audio jack that supports both speaker (stereo) and microphone (mono) headsets.
IrDA Port The IrDA (Infrared Data Association) port communicates with IrDA-enabled devices such as PCs, printers, modems, or other Dolphin terminals. The maximum speed is 115kbps. For more information, see Using Infrared on page 7-5. Scan LED The scan LED lights red when you press the SCAN key in scanning applications. Decode LED The decode LED lights green when a scanned bar code is successfully decoded. Note: Both LEDs can be programmed by various software applications. Touch Screen Display The 3.
Back Panel Features The following graphic describes features on the back panel of the Dolphin 7900 terminal.
Image Engine Window Dolphin 7900 terminals have an optional image engine that reads and decodes linear, stacked linear (PDF417), and 2D matrix bar code symbologies. With the latest CMOS-based technology, the engine works like a digital camera and enables digital image capture, signature capture, and reading of OCR characters. The engine points out the top panel at a slight downward angle so that the terminal needs to be positioned slightly above the image or bar code when using the engine.
Side Panel Features The following graphic shows the left, side panel: Programmable Side Button Access Door Programmable Side Button Programmable buttons are located on both side panels. By default, these buttons activate the image/scan engine as a more ergonomic alternative to pressing the SCAN key on the keyboard. These buttons can be programmed to perform specific functions in the Buttons setting. For details, see Buttons on page 6-3.
4. Using the special tool from Hand Held Products, unscrew both screws. Installing a Mini-SD Card 1. When the access door is open, slide the mini-SD card into the appropriate slot until it clicks into place. Rubber Gasket 2. The bottom panel inside the opening displays the following guide to help you insert the mini-SD card correctly: mSD SIM To remove an installed mini-SD card, tap on the edge lightly to unlock the card; the card will pop out just enough for you to grab its edge and pull it out. 3.
Installing a SIM Card Note: The SIM card must be activated by the service provider prior to installation. 1. When the access door is open, slide the SIM card into the appropriate slot. The guide on the bottom panel inside the opening illustrates the correct position; see page 3-7. 2. Replace the access door and tighten the screws. There is a rubber gasket on the inside of access door that must be in place when you seal the door. This gasket performs the sealing action for the door. 3. Power on the terminal.
I/O Connector I/O Connector Note: Signals referenced are for a DTE device. I/O Connector The bottom panel features a custom, industrial-grade mechanical connector with 17 pins. When seated in a Dolphin 7900 Series peripheral, the terminal is powered, the main battery charged, and communication occurs via this connector. All Dolphin 7900 Series peripherals are designed to work exclusively with this connector. The 17-pin connector communicates with Dolphin peripherals via RS-232 or USB.
Battery Power The Dolphin 7900 features intelligent battery technology with two types of battery power: • • The main battery pack installed in the back panel The backup battery located inside the terminal Both batteries work together to prevent data loss when the terminal is used over long periods of time. Both batteries must also be charged to full capacity before using the Dolphin 7900 for the first time. Main Battery Pack Use only the Li-ion battery packs provided by Hand Held Products.
Managing Battery Power Data and files saved on the Dolphin terminal may be stored in RAM; therefore, maintain a continuous power supply to the terminal to help prevent data loss. Letting the backup battery become fully discharged causes the terminal to lose all data in RAM. The internal battery discharges prematurely if there is not at least a partially charged battery in the terminal. When you remove a battery pack, insert another charged battery pack in the Dolphin.
Checking Battery Power Tap Start > Settings > System tab > Power. The Battery tab opens displaying the charge status of both the installed Li-ion battery pack and the NiMH backup battery inside the terminal. For more information, see Power on page 6-11. Storing Batteries To maintain optimal battery performance, follow these storage guidelines: • Avoid storing batteries outside the specified range of -4 to 104° F (-20 to 40°C) or in extremely high humidity.
Dolphin 7900 Technical Specifications System Architecture Processor Intel X-Scale PXA255 400MHz Software Development Kits Hand Held Products Dolphin SDK for Visual Studio 2005: supports C/C++, C# and Visual Basic development on Visual Studio 2005 Operating Platform Windows Mobile 5.
Dolphin 7900 Technical Specifications Operating Temperature 14 to 122°F (-10°C to 55°C) The terminal can operate in temperatures lower than -20°C with potential degradation in performance depending on the application. Storage Temperature -4° to 158°F (-20° to 70°C) Humidity 95% humidity, non-condensing ESD 15 KVA on all surfaces Impact Resistance Withstands multiple 5ft (1.
4 Using the Image Engine Overview The Dolphin 7900 terminal houses a compact image engine that instantly reads all popular 1D and 2D bar codes and supports omni-directional aiming and decoding for greater flexibility in real-world settings. The image engine can also capture digital images, such as signatures and pictures of damaged inventory. Images are saved in industry-standard file formats. Image Engine Options Dolphin 7900 terminals may be equipped with one of the following image engines.
Bar Code Symbologies Supported The Dolphin 7900 supports the following bar code symbologies: Symbology Type Symbology Name 1D Symbologies Codabar Code 3 of 9 Code 11 Code 32 Pharmaceutical (PARAF) Code 93 Code 128 EAN with Add-On EAN with Extended Coupon Code EAN-13 GS1 Databar Interleaved 2 or 5 Matrix 2 of 5 Plessey PosiCode Straight 2 of 5 IATA Straight 2 of 5 Industrial Telepen Trioptic Code UCC/EAN-128 UPC and UPC-A 2D Symbologies Aztec Code 16K Composite Data Matrix GS1 Databar MaxiCode OCR PDF41
Activating the Engine The Dolphin 7900 terminal offers the following options to activate the engine: • The SCAN key located in the center of both keyboards for easy access from either hand; see SCAN key on page 3-2. • The buttons located on each side panel; see Side Panel Features on page 3-6. Programmable Side Buttons By default, the buttons on each side panel activate the imager; for exact location, see Side Panel Features on page 3-6.
Sample Bar Codes Use the following bar codes to verify decoding. Each bar code displays a text message on the screen when scanned. Sample 128 Bar Code Sample PDF417 Bar Code Text message: Code 128 Text message: PDF417 Test Message Omni-Directional Scanning Dolphin terminals support omni-directional scanning. In general, the aiming pattern or beam is smaller when the terminal is held closer to the bar code and larger when farther from the bar code.
Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following the basic guidelines, new users can easily develop their own technique and, with practice, quickly learn to adapt it to different application environments. Image Preview When the imaging process is initiated, the Dolphin 7900 touch screen displays a preview of the object.
4-6 Rev F 10/16/07 Dolphin® 7900 User’s Guide
5 Using the Keyboards Overview The Dolphin 7900 Series features two keyboard options: 25-key Numeric Keyboard 36-key Alpha Keyboard DE L '(/ %.63 63 BKSP S E ND ) 6(1' ) (1' ) ) ) S TAR ART ) ) + ) 67$57 SP ) E ND F1 F2 F3 F4 ) Both keyboards are recessed under the overlay for maximum durability and backlit for maximum viewability in various lighting conditions.
Using the Function Keys Function keys are those keys that perform specific functions and usually have the name of the function they perform. Name Key Function The Backlight key turns the keyboard backlight on and off. Backlight BKSP Backspace (BKSP) Delete (DEL) DE L E SC The Backspace function is performed by pressing the Red modifier key + the left arrow. Backspace moves the cursor back one space and deletes each time the key combination is pressed.
Press To … Move the cursor one character to the left. The up and down arrows can be used for • Volume up and down commands when pressed in combination with the blue modifier key, or • Page up and page down commands when pressed in combination with the red modifier key. Other functionality varies according to the application in use. Using the Modifier Keys Modifier keys are those keys that modify the next key pressed.
25-Key Numeric Keyboard The following graphic displays the 25-key numeric keyboard. Escape key Microphone SCAN key OK key '(/ %.63 Tab key 63 ALT key ) 6(1' Blue & Red Modifier keys Navigation keys (1' ) ) ) ) ) ) ) 67$57 ) Power key Backlight key ) Caps Lock key Alpha Mode The 25-key keyboard defaults to numeric mode. Numeric mode is when you type numbers with the number keys. Alpha mode is when you type letters or characters with the number keys.
Blue Key Combinations Alpha Mode - Double-tap the Blue modifier key Key Character (lower case) Character (upper case) 1 _ = / \ _ = / \ 2 abc ABC 3 def DEF 4 ghi GHI 5 jkl JKL 6 mno MNO 7 pqrs PQRS 8 tuv TUV 9 wxyz WXYZ * * * . : ; - + : ; - + , @ ? ! @ ? ! Functions - Press the Blue key once in combination with the next key.
5-6 Key Combination Function/Special Character Red + 6 F6 Red + 7 F7 Red + 8 F8 Red + 9 F9 Red + 0 F10 Red + * # Rev F 10/16/07 Dolphin® 7900 User’s Guide
36-Key Alpha Keyboard The following graphic displays the 36-key alpha keyboard. Escape key Microphone SCAN key OK key DE L ALT key Caps Lock BKSP SP S E ND E ND - Blue & Red Modifier Keys + S TAR ART Tab key F1 F2 F3 NUM Lock key Power key Navigation keys Numeric indicators F4 Backlight key NUM Lock Key The 36-key keyboard defaults to alpha mode. Alpha mode is when you type letters with the letter keys. Numeric mode is when you type numbers or characters with the letter keys.
Blue Key Combinations Key Combination Function Blue + Backlight Power Blue + Left Arrow Send Blue + Right Arrow End Blue + Up Arrow Volume up Blue + Down Arrow Volume down Red Key Combinations Key Combination Function Red + Left Arrow Backspace Red + Right Arrow Space Red + ESC (hold) Soft reset (warm boot) Red + TAB (hold) Hard reset (cold boot) Red + E F1 Red + J F2 Red + O F3 Red + T F4 NUM Key Combinations Pressing the Num key once switches the keyboard to numeric mode.
Key Character WX @ YZ # Note: You do NOT need to press and hold the NUM key when pressing the next key. Numeric Shift in Numeric Mode When typing in numeric mode, tapping the Blue modifier key acts like a Shift key that enables you to type special characters in addition to those indicated on the overlay.
5 - 10 Rev F 10/16/07 Dolphin® 7900 User’s Guide
6 Settings Overview Customized settings are available on the Start menu. Go to Start > Settings and settings screen opens displaying the Personal tab. Settings consists of three tabs: Personal, System, and Connections. Personal Tab System Tab Connections Tab Tab Description Personal Customizes buttons, set SIP options, and adjust headset settings; see Personal Tab on page 6-2. System Adjusts system settings; see System Tab on page 6-7.
Personal Tab To access the Personal tab, go to Start > Settings. The screen opens displaying the Personal tab. Icon Description Buttons Program the side buttons to perform specific tasks. For more information, see Buttons on page 6-3. Headset Adjust audio settings for headset use; see Headset Control on page 6-4. Input Customizes the SIP. For details, see Input on page 6-5. Lock Password protect the terminal to limit access to your device.
Buttons Buttons programs both keyboard buttons and the side buttons to launch applications or execute commands. The default button assignments that appear on the Buttons window are inactive until you enable the HotKeys Power Tool. To Enable HotKeys 1. Tap Start > Power Tools and tap the HotKeys icon once Buttons setting are active. . HotKeys is enabled and the button assignments in the 2. Verify the assignment by tapping the button on the keyboard.
Command Description Nothing happens when the button is pressed. This is the default setting for the LSide and RSide buttons and means that pressing either button activates the image engine. Performs the same function as tapping OK on the screen. Scrolls down in the open application. Scrolls left in the open application. Scrolls right in the open application. Scrolls up in the open application.
Input The Input settings enables you to customize input from the SIP, adjust word completion settings in Microsoft applications, and set defaults for voice recording. Input Tab Word Completion Tab Options Tab Menus - Adding a Program to the Start Menu You can add existing programs you use often, such as File Explorer, to the Start menu for faster access. You are not installing the program, just allowing access to it from the Start menu. Note: The Start menu can hold only seven applications total.
Note: We recommend that you Copy and Paste Shortcut so that you do not alter your program configurations by accident. Using Copy and Paste Shortcut (as opposed to Cut and Paste) ensures that the program files remain where they need to be for the system to find them to perform system functions. 1. Tap Start > Programs > File Explorer, and navigate to the program. File Explorer opens to My Documents by default; to see a list of all folders, tap the folder name and then My Device. 2.
System Tab The System tab enables you to verify and sometimes alter system parameters. To access the System tab, go to Start > Settings > System tab. Tap the appropriate icon to open that system setting. About The About system setting displays specific information about what is loaded on the terminal. It contains three tabs: Version tab Displays the information about the software, operating system, and processor of the terminal.
Field Description Turn on backlight Select this option if you want the backlight to turn on when the a button is pressed or the touch screen is tapped. Dim backlight if Select how many minutes you want to elapse before the backlight dims. Backlight Intensity Move the slider to set the intensity of the backlight. OK Tap OK to save settings. The display backlight functions according to the settings saved on each tab. Certificates This system setting is designed to manage certificates for 802.
Memory The Memory system setting displays capacity and usage statistics for both RAM (volatile) and IPSM/Storage Card (non-volatile) memory. Access this setting whenever you receive system messages about memory. There are three tabs: Main, Storage Card, and Running Programs. Main Tab This tab displays the usage statistics of the 64MB of on-board, volatile RAM memory. Field Description Columns Storage: The part of RAM memory used for storing programs and program data.
IPSM—Short for Internal Persistent Storage Manager, this is14MB of on-board Flash memory that is non-volatile. Because this memory is non-volatile, data or programs stored in IPSM are not affected when power is removed. Autoinstall programs, for example, are stored in IPSM so that they are always installed at cold-boot startup. Storage Card—You can install one memory card in Dolphin terminals (see Access Door on page 3-6).
Power Power system settings contains three tabs: Battery, Wireless, and Advanced. Tab Description Battery Tab Checks the remaining charge of both the main and backup batteries. For more information about the terminal’s batteries, see Battery Power on page 3-10. Determines the power settings for your wireless connection. Select Wireless signals off… when you don’t want to use system power to power up the radio(s). Select Wireless signals on when you want the radio to use system power to transmit.
The terminal is loaded with a number of pre-programmed regional settings. Select one from the list and the results appear on the screen. To see specific settings or change a specific setting, tap on one of the tabs, make the change and tap OK to save it. Remove Programs The Remove Programs settings enables you to remove programs installed on the terminal. Use this setting to troubleshoot when you receive messages that the device is out of memory. The programs removed are removed from RAM memory.
Alignment tab The Screen system setting opens to the Alignment tab. On this tab, you can re-align the screen. Remember, you first align the screen at bootup. You would need to re-align the screen again if tapping buttons or icons with the stylus no longer seems to work appropriately. For more information, see Align the Screen on page 2-7. ClearType Tab The Dolphin 7900 displays support ClearType font rendering.
Connections Tab The Connections tab enables you to manage your network connections. Icon Tapping this icon… Beam Enables you to verify and adjust the infrared settings of the IrDA port; see Using Infrared on page 7-5. Connections Opens the connections manager; see Connections Manager on page 6-16. Network Cards Enables you to access the Wireless and Network Adapters tabs; see Network Cards on page 6-17.
Com Port Assignment Table The Dolphin 7900 terminal ships with the com ports assigned as follows: Com Port Assignment 1 Serial port; this is the 17-pin connector on the bottom panel. See I/O Connector on page 3-9. 2 Bluetooth Module If there is no Bluetooth hardware installed on the terminal, this com port is unassigned. 3 Raw Infrared 4 Unassigned 5 USB virtual serial port 6 IrDA, if IrDA is enabled. If IrDA is disabled, this com port becomes available.
Connections Manager Microsoft’s connection manager sets up various network connections to Internet Service Providers (ISPs) via external modem. All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP). If you are using one of the on-board wireless radios to connect to a network, do not enter network parameters in the connections manager. The Dolphin terminal uses the radio’s settings to connect to the network.
Modify an Existing Connection Manage Existing Connections appears on the Connections tab after at least one network connection has been established. Tap Manage Existing Connections on this tab and follow the setup screens. You will usually be walked through the same setup screens used to establish the connection. Advanced Tab The Advanced tab enables you to select the default network, dialing rules, and IP address exceptions for modem connections.
2. In the list, tap on an adapter to review its settings. (Server-assigned IP addresses use DHCP.) 3. If you make a change on one of these tabs, tap OK. The following message appears: 4. You must perform a soft reset to update the registry; see Soft Reset (Warm Boot) on page 2-11. During the soft reset, the new registry entries created by the changes can be read by the applications that need them.
7 Communications Overview You can exchange information between your Dolphin terminal and other mobile devices, a desktop computer, a network, or the Internet using the following connection options: • • • • Microsoft ActiveSync v4.1 or higher - see Using ActiveSync on page 7-2. Use the infrared (IrDA) port - see Using Infrared on page 7-5. Connect to an ISP - see Using an ISP on page 7-9. Connect via wireless radio - see Wireless Radio Options on page 7-8.
Using ActiveSync Using Microsoft ActiveSync, you can synchronize and transfer information between your desktop computer and Dolphin terminal. The most current version of ActiveSync can be downloaded from www.microsoft.com. Additional Capabilities With ActiveSync, you can also: • Back up and restore your device data. • Copy (rather than synchronize) files between your device and desktop computer. • Control when synchronization occurs by selecting a synchronization mode.
Exploring the Terminal from the Desktop Computer When the terminal and desktop computer are connected, open the main ActiveSync window (on the desktop), and click Explore. The Mobile Device folder opens in Windows Explorer. The terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping or copying and pasting as you would for moving files between folders on your hard drive.
3. Depending on the program, you may need to open File Explorer on the terminal, navigate to the folder where the program is located, and tap on the program file to install it. If you copied the file to the Autoinstall folder, you can either tap on the program inside the Autoinstall folder or perform a hard reset and the program will install as part of the Autoinstall process (page 2-7). Remember! A hard reset erases RAM data (page 2-11). 4.
Using Infrared Dolphin 7900 terminals contain an IrDA port on the top panel (see IrDa Port on page 3-2). Using the IrDA port, you can send and receive data between the terminal and other devices equipped with infrared. This can include, but is not limited to, Windows Mobile information such as Contacts and Tasks, as well as software upgrades. Verify That the IrDA Port is Enabled The IrDA port must be enabled to transmit data. By default, the IrDA port is assigned to Com port 6 and is enabled.
Verify That Beam Settings Are Set to Receive The Beam Settings must be set to receive for the terminal to receive data from other infrared devices. To verify, tap Start > Settings > Connections tab > Beam. The Beam Settings window should appear as follows: Sending and Receiving To send or receive, the IrDA ports of both devices - whether it’s two terminals, or a terminal and a host device - must be aligned with each other and within a close range. The maximum data-transfer speed is 115 Kbps. Sending 1.
Troubleshooting If the Beam Settings are not set to receive or you’ve aligned two IrDA ports and the terminal is still not receiving, go to Start > Programs > Infrared Receive. The terminal searches for the sending device.
Wireless Radio Options Dolphin 7900 terminals can be configured with a combination of the following radios: • 802.11b - Wireless LAN (WLAN) Communications with 802.11b (see page 8-1) • Bluetooth - Wireless PAN (WPAN) Communications with Bluetooth (see page 9-1) • GSM/GPRS - Wireless WAN (WWAN) Communications with GSM/GPRS (see page 10-1) Radio Combinations Note: Configuration of simultaneous radio operation is done during the manufacturing process according to FCC regulations.
Disabling Radios To disable all radios, select None and tap Apply. Using an ISP The communication software for creating an ISP connection is already installed on your device. Your service provider should provide the software needed to install other services, such as paging and fax services. After you are connected (via wireless radio), you can send and receive e-mail messages by using Inbox and view web pages using Pocket Internet Explorer. For more information, see Messaging on page 12-8.
7 - 10 Rev F 10/16/07 Dolphin® 7900 User’s Guide
8 Wireless LAN (WLAN) Communications with 802.11b Overview Dolphin terminals are available with an on-board 2.4 GHz 802.11b WLAN (Wireless Local Area Network) radio that uses Direct Sequence Spread Spectrum (DSSS) technology to spread the signal continuously over a wide frequency band at a data rate of up to 11 Mbps. In addition, the open software architecture makes the Dolphin terminal a complete solution for a variety of wireless mobile data collection applications.
802.11b Settings If you want to use standard WEP encryption or no authentication, you need to use 802.11b settings to configure the radio with the 802.11b Settings utility. ! If you use 802.11b Settings to configure the radio, make sure that the 802.11b Wireless Security Supplement is not present in the \IPSM\Autoinstall folder. The should not appear in the command bar on the Today screen. Accessing 802.11b Settings Access 802.11b settings two ways: 1. Tap Start > Settings > Connections tab > 802.
Field Description Ping Tap this button to open the Ping Utility window where you can ping IP addresses. IP Address=Enter an IP address to ping. Size (Bytes)=The current data packet size in bytes; 32 is the default. Timeout (ms)=The current timeout; 500 is the default. Increase or decrease the timeout by tapping the up and down arrow buttons. Clear=Clears IP Address input and the ping statistics field. Ping=Pings the IP address entered in the input field.
Config Tab The Config tab provides a list of all APs and peer stations in range. Use the list to create and edit SSID profiles for APs you want the terminal to associate with. ! If you decide to use the 802.
Active SSIDs This table shows all APs or peer stations (creator of IBSS) in the vicinity of the terminal that accept broadcast associations. Each record displays information in the following six columns (Scroll right to see all the columns.): Column This column displays… SSID The Network Name of the AP or peer station and shows the signal strength icon: =Excellent signal strength. Excellent connection. =Poor signal strength. Poor connection. =Radio disabled. No radio connection.
Network Profile Tab Field Description Network Name &Type SSID Enter an SSID, which is the Network Name. Check with your network administrator for Network Name (SSID). TX Rate Choose the transmit rate from the drop-down list - 1MB, 2 MB, Auto 1/2 MB, 5.5 MB, 11 MB, or Fully Auto. The transmit rate is set to Fully Auto by default. Type From the drop-down list, select Peer-to-Peer=For communication between two (or more) radio stations (cards) without an AP. Access Point (AP)=Infrastructure mode.
Authentication Tab On the Authentication tab, you configure the WEP encryption key for secure wireless communication. To use WEP, the encryption key must be configured as part of the profile before connecting. For more information about configuring a profile, see To Create a New Profile on page 8-5. Field Description *Authentication Algorithm This drop-down list is active and configurable only when the WEP Key is enabled for the selected SSID profile.
Advanced Tab Field Description Power Save Mode This drop-down list determines the settings for Power Save Mode. • Disable=Disables the Power Save mode. • Always Enable=Enables Power Save mode. This is the default setting. • Auto Enable=Automatically enables the Power Save mode when the terminal is running on battery power and automatically disables Power Save mode when the terminal is running on external power. Slider The slider is active only if Power Save Mode is enabled.
Using the Status Icon You access the 801.11b Settings by tapping the Status icon once on the Today screen . The following menu pops up: Menu Option Description Wireless Radio On Turns on the radio. LED is on and the Link Icon displays with signal strength. Wireless Radio Off Turns off the radio. A pop-up window will ask for your confirmation. If confirmed, the LED will be off and the Status icon will change color from green to red on the top without signal strength displayed.
802.11b Wireless Security Supplement The 802.11b Wireless Security Supplement is also called the AEGIS Client® offers a comprehensive IEEE 802.1X supplicant for securing wired and wireless networks. The Client is a standards-based implementation of IEEE 802.1X and can be configured to work with almost any network equipment–wired or wireless–that supports the 802.1X authentication standard. The Client is also interoperable with 802.
7. Select Paste on the popup menu and the LeWM*.cab file appears in the folder. 8. Press and hold the Red + Tab keyboard buttons to cold boot the terminal. The Client installs during AutoInstall. 9. When AutoInstall is complete, a icon appears in the command bar on the Today screen. For more information, see Opening the Client on page 8-12. AP Search Threshold ! If you are using one of these authentication methodologies, you need to configure your 802.11b connection here, NOT through 802.
Opening the Client To access the client the first time, tap Start > Programs > Meetinghouse AEGIS Client. After the Client has been activated, you can tap the icon in the lower left corner of the command bar. Color Indicators The color of the icon indicates the status of the controlled ports. Icon Color This color icon indicates that … Green Authentication succeeded. Yellow Authentication is in process. Red Authentication failed.
Client Menu To open the client menu, tap Client in the command bar along the bottom of the window. Menu Item Description Close Closes the Client's interface, while leaving the client running. Start/Stop Starts or stops 802.1X authentication. After you finish the initial configuration, tap the network interface and tap Start. If the port is already active, tap Stop first, then Start to force the program to read the new configuration file. Restart Same as a Stop followed by Start.
Menu Item Description Each entry is listed sequentially with a time stamp and a text message. Tap Refresh to query the log again. Tap Close to return to the main screen. Help Menu Tapping Help opens the help menu. Select Online Help to access online help. Select About to review software version information. Status Bar The status bar at the bottom of the main screen indicates the connection status between the network card and the AP.
Port Menu Options The port menu enables you to use 802.1X authentication, change the port configuration, or remove it from the port list. If there are no entries in the Port list, follow the advice in the troubleshooting section to resolve the problem. Menu Item Description Enable and Disable These commands enable or disable 802.1X authentication on the port. The port should be enabled before the protocol is started.
User Tab The User settings tab defines the protocol and the credentials used to authenticate a user. Field Description Profile Multiple user credential profiles can be created for use when the user roams from one network to another. The drop-down list contains existing authentication credential profiles. Select a profile from the list to edit it in the fields that follow. • Tapping Add permits new profiles to be added to the list. A screen appears where you can enter a name for the new profile.
Field Description Use certificate This is the certificate to be used during authentication. A certificate is required for TLS, optional for TTLS and PEAP, and unused by MD5 and LEAP. Therefore, this option becomes active only when TLS, TTLS, or PEAP is selected as the Authentication type. If Use certificate is enabled, the client certificate displayed in the field is the one that is passed to the server for verification.
System Tab The System Settings tab controls logging and the port manger timeout period. Field Description Log Level These settings control the detail of the log messages generated by the Client. Each level is cumulative. By default, all errors, warnings, and information events are logged. Each entry records a severity code (of one [debug message] to four [error] asterisks), a time stamp, and a message. • Errors - only the most severe conditions are logged. • Warnings - less severe conditions are logged.
Server Tab The Server identity tab defines the credentials the client uses to authenticate the server during TLS/TTLS/PEAP authentication message exchange. The Client uses this information to verify that the Client is communicating with a trusted server. Field Description Do not validate server certificate chain If this option is selected, the server certificate received during the TLS/TTLS/PEAP message exchange is not validated.
Wireless Networks Tab Field Description Available Networks Displays the networks the terminal recognizes as available to connect to. When the Client is first installed, there are no entries in the Available Networks list. Scan Displays a list of networks broadcasting their availability. You can also attach to networks who are not broadcasting. Move to Configured Activates after Scan has been tapped and the available networks have been retrieved.
Protocol Tab The Protocol tab configures parameters that apply to all the networks the selected port connects to. Field Description Protocol Settings These are the timer intervals and retry settings defined in the 802.1X standard. They determine how long the supplicant state machine will wait in a given state. These parameters shouldn’t be modified without an understanding of the supplicant state machine. For more information about the supplicant state machine, obtain its 802.1X protocol specification.
Configuring a Network Profile To configure a network profile, on the main screen, tap and hold on the port, tap Configure, then tap Add. The Network Profile screen opens displaying the Profile Info tab. Note: The settings on these tab windows are interrelated. This means that selecting one may disable access to others. Profile Info Tab Field Description Network Profile Enter the name of this record.
WEP Mgmt Tab Field Description Provide encryption key dynamically This option is selected by default. If this option is selected, the other WEP settings on this page are disabled. To enter a custom WEP, de-select this option. The other fields become active. Use key for data encryption Select this option to manually enter a WEP key to encrypt your data to the AP. You enter that key in the Key field below. Use key to authenticate with AP Select this option if your network does not support 802.
WPA Settings Tab Field Description WPA Mode This drop-down list contains the following options: • Disabled - Do not enable WPA mode. This is the default selection. • WPA 802.1x - Enable WPA and obtain key information through the 802.1x protocol. • WPA PSK - Enable WPA with Pre-Shared Key (PSK) information entered in the field below. This mode is used if the 802.1x protocol is not being used for authentication. PSK pass-phrase This field activates if you select WPA PSK in the WPA Mode drop-down list.
Installing Certificates with CertAdd Certificate Requirements During configuration, you may have specified one or two certificates to use during the authentication process. The specified identity should match the Issued to field in the certificate and should be registered on the authentication server (i.e., RADIUS server) that is used by the authenticator. In addition, your certificate must be valid on the authentication server.
Advice and Workarounds Issue Possible Causes and Solutions The Client will not start on the device with an error message about missing files. Perform a soft reset. The wireless network interface (port) does not appear in the main AEGIS screen. • The license is not valid (If you have entered a time-limited license, is your clock on the device correct?). • Restart the client - on the main screen tap Client > Restart. • Perform a soft reset.
Issue Possible Causes and Solutions I cannot attach to my old network that does not support 802.1x authentication, but is using WEP encryption. • Verify that you can see your SSID in the Available Networks list on the Wireless Networks tab. Move the SSID to the top of the Configured Networks list so that it is accessed first. If the SSID is not there, you can add it manually and enter the SSID as the network name. • Select the SSID and tap Properties.
8 - 28 Rev F 10/16/07 Dolphin® 7900 User’s Guide
9 Wireless PAN (WPAN) Communications with Bluetooth Overview Dolphin terminals are available with a Bluetooth radio for WPAN (Wireless Personal Area Network) usage. When the Dolphin is first initialized, the *.cab file and module for Bluetooth are installed. Enabling the Bluetooth Radio Before using the radio, make sure that the Bluetooth radio is enabled. When the radio is enabled, the Bluetooth icon appears in the task tray on the Today screen.
Assign COM Ports Follow these steps to view and/or modify the Bluetooth COM ports. 1. Tap on the Bluetooth icon on the Today screen. Select Advanced Features then My Bluetooth Device. Note: If you installed OBEX, the menu also lists Transfer via Bluetooth. 2. The My Bluetooth Device screen appears. Tap on the COM Ports tab. 3. As needed, view and/or enable/disable the Bluetooth COM port assignments. Tap OK. You can also disable the IrDA port to free up a port for Bluetooth devices.
Discover Bluetooth Device(s) Follow these steps to discover other Bluetooth devices nearby, including non-phone devices. The Device Discovery Wizard is a more detailed alternative to using the Bluetooth “Get Connected!” Wizard or Bluetooth ActiveSync or Bluetooth LAN Access options. The Device Discovery Wizard allows you to discover any type of Bluetooth device. 1. If not open, launch the Bluetooth Devices folder. Tap on the Bluetooth icon on the Today screen.
2. Tap and hold your stylus on the Bluetooth device you want to bond with. In the pop-up menu, select Bond. 3. Alternatively, after selecting a device, tap on the Bond icon. Or tap on Device, then select Bond. 4. The Bluetooth Device Bonding Wizard launches. Follow the wizard to bond with your selected device. 5. As prompted, make sure the Bluetooth device that you want to bond with is in Bondable mode.
6. If the remote device is set up to accept bonding, a Bluetooth Passkey screen appears. To continue bonding, enter the correct passkey and tap Reply. 7. When you have successfully bonded with the other device, tap Finish. View Device Properties Follow these steps to view the properties of an already discovered device. 1. If not open, launch the Bluetooth Devices folder. Tap on the Bluetooth icon on the Today screen. Select Advanced Features then Bluetooth Devices. 2. Select a device.
2. Tap on the tab for the type of device you would like to set a favorite for. If needed, use the arrow buttons to scroll and find the tab you need. Note: Tabs appears only for COM ports you have enabled. To enable a port, refer to the “Assign COM Ports” section earlier in this chapter. 3. To select a favorite device, select Use the favorite selected above. In the drop-down list, select your device. Tap OK. 4.
2. Tap and hold your stylus on the device you wish to delete. In the pop-up menu, select Delete. Turn Radio Transmitter ON/OFF You may want to turn off the radio transmitter to save power or if you are entering an area with radio restrictions (e.g., an airplane). 1. Tap on the Bluetooth icon in the task tray on the Today screen. 2. In the pop-up menu, select Turn Transmitter OFF. 3. The Bluetooth Card radio transmitter shuts off. The Bluetooth icon and menu options becomes gray. 4.
SCENARIO #2: Your Bluetooth Devices folder contains no favorite desktop computer. (a) When you tap on Bluetooth ActiveSync, a screen appears that allows you to choose which computer to connect to in your Bluetooth Devices folder. Choose a computer from the list and tap Select, or tap Find to search for another computer. Note: If the computer you want to connect to is not listed, tap Find to begin a search. Proceed as described in Scenario #3 on page 9-8.
(d) The Connect To screen appears, reporting that it is trying to connect to Wireless ActiveSync. (e) After a successful connection is made, the status screen reports Connected. Now you are ready to synchronize, if desired. Bluetooth LAN Access This section explains how to use the Bluetooth LAN Access feature to quickly and easily connect to a Bluetooth-enabled LAN access point. 1. Tap on the Bluetooth icon. In the pop-up menu, select Bluetooth LAN Access. 2.
SCENARIO #2: Your Bluetooth Devices folder contains a favorite access point. (a) When you tap Bluetooth LAN Access, the device automatically tries to connect with your favorite access point. (b) If your LAN requires a passkey, a screen appears, asking for the passkey. Enter the passkey, then tap OK. (c) After a successful connection is made, the status screen reports Connected. (d) Now you are ready to access your LAN for Internet access, files, etc.
OBEX This section explains how to use the OBEX (object exchange) application to trade business cards, contacts or files with another Bluetooth device that supports OBEX. Bluetooth OBEX application supports five operations: • • • • • • Exchange Business Cards Send a Contact Send a File Browse Remote Device Receive Contact or File Enable File Sharing The first four operations - exchange business cards, send a contact, send a file, and browse remote device - are client-oriented.
3. Now you are ready to exchange business cards. Tap on the Bluetooth icon. In the pop-up menu, tap Transfer via Bluetooth > Exchange Business Cards. 4. If your device has no devices in the Bluetooth Devices Folder, then it begins to search for Bluetooth devices nearby. 5. Select the Bluetooth device you wish to exchange business cards with. If the device is not listed, tap Find. 6. Your device begins exchanging business cards.
4. If your device has no devices in the Bluetooth Devices Folder, then it begins to search for Bluetooth devices nearby. 5. Select the Bluetooth device you wish to send the contact(s) to. If the desired device is not listed, tap Find. 6. Your device processes and sends the contact(s). Send a File 1. Make sure the other Bluetooth device can receive a file; that device must support the OBEX Object Push server profile.
4. Select the Bluetooth device you wish to send a file. If the desired device is not listed, tap Find. 5. In the next screen, tap on the file you wish to send. You can use the Folder and Type drop-down menus to search for your file. Also, you can scroll horizontally to view the folder, date, size, type, and location of each file. 6. Your device sends the file. Browse Remote Device The Bluetooth File Explorer lets your device share files with another Bluetooth device.
2. Now you are ready to browse the remote device. Tap on the Bluetooth icon. In the pop-up menu, tap Transfer via Bluetooth > Browse Remote Device. 3. If your device has no devices in the Bluetooth Devices Folder that supports OBEX File Transfer, then it begins to search for Bluetooth devices nearby. 4. Select the Bluetooth device you wish to browse. If the desired device is not listed, tap Find. 5. Your device begins to establish a file sharing connection. 6.
Send/Receive File(s) or Folder(s) • Single-tap items to select them for transfer. • Double-tap on a folders to open it and see its contents. 1. Select the file(s) or folder(s) that you wish to transfer. You can select items from only one device per transfer session. 2. There are two different ways to initiate the transfer: • Tap File > Send to remote or Get from remote, as applicable. The inappropriate option should be gray. • Tap on the Send to remote icon or Get from remote icon, as applicable.
Delete File(s) or Folder(s) 1. Select the items you wish to delete. You can only delete items from one device at a time. 2. Tap on the File menu. Select Remote device or Local device, wherever the items are located, then tap Delete remote item(s) or Delete local item(s), as applicable. 3. Tap and hold your stylus an item in either the remote or local device that you wish to put in a new folder. In the pop-up menu, select Delete folder. 4. Tap Yes to confirm. Refresh Remote View 1. Tap on the Device menu.
Exit Bluetooth File Explorer To exit the Bluetooth File Explorer, tap File > Exit. Receive Contact or File 1. Tap on the Bluetooth icon. In the pop-up menu, tap Transfer via Bluetooth > Receive Contact or File. 2. The Receive Contact or File status screen appears. Your device waits two minutes for the contact or file. 3. After successfully connecting to the remote device, the screen reports Connected then disappear. The new contact or file should now be on your device. 4.
Using the Dialer This section explains how to assign a dialing prefix and use the Dialer to dial a number directly from your Contacts list. The Dialer makes it quick and easy to perform dial-up networking. Note: The Dialer has been verified to work with Nokia and Ericcson phones and is known not to work with the Motorola 270c, NTT Docomo Paldio 633S or Sony au C413S phone. Results may vary with other phones that are not listed as being supported by the Bluetooth system.
4. If you have multiple phone numbers for a contact, a screen appears listing them, including any dialing prefix you may have assigned. Select the phone number you wish to dial. 5. Your device connects to your phone and begins dialing. The Dialer can dial a phone number containing any of the following non-numeric characters: * # + .
(c) Preparing your Bluetooth passkey. 4. When the search is complete, a list of the discovered Bluetooth phones appears. Choose the phone you wish to connect to, and tap Select. A service discovery phase begins, about 5-10 seconds. 5. As prompted in the next screen, prepare your phone for bonding. For instructions on setting your phone to “Bondable” or “Pairable” mode, refer to your phone manual. Have your passkey ready, then tap Next>. 6. In the next screen, enter the passkey. Tap Reply. 7.
3. As directed on the next two screens, assign the phone a unique name, set the phone to Discoverable mode, and tap Next. 4. The device searches for the phone. When the search is over, a list of the discovered Bluetooth phones appears. 5. Choose the phone you want to connect to, and tap Select. A service discovery phase begins, about 5-10 seconds. 6. The next two screens describe procedures you complete outside of the wizard.
Dial Up Connection Complete the following steps to create a new Bluetooth internet connection via an ISP. Before setting up dial-up networking, prepare yourself with dial-up information and other necessary settings from your office network or isp. Also, refer to Microsoft’s connection manager for additional information. 1. Tap Start > Settings > Connections tab > Connections. 2. In the top field, select Internet Settings and tap Modify. Then, tap New. 3.
Automatic Connections for Nokia 3650/7650: • • • • • • • • On the phone, press MENU. Scroll to Connectivity, then press OPTIONS. The Open option should be highlighted. Press SELECT. The Bluetooth option should be highlighted. Press OPTIONS. The Open option should be highlighted. Press SELECT. Scroll to the right tab to access the Paired devices list. Highlight your mobile computer, then press OPTIONS. Scroll to Set as authorized, then press SELECT. In the confirmation screen, press YES.
10 Wireless WAN (WWAN) Communications with GSM/GPRS Overview Dolphin terminals can be configured with a Siemens® GSM/GPRS quad-band radio module for Wireless WAN connectivity. GSM GSM stands for Global System for Mobile communications. It is an open, non-proprietary wireless wide area networking system that is constantly evolving and growing. One of its great strengths is international roaming capability, which provides standardized dialing in more than 170 countries.
SIM Card SIM stands for Subscriber Information Module. A SIM card stores the subscriber's personal information, GSM/GPRS radio settings, security key, contacts, etc. SIM cards can be installed and removed from compatible mobile devices, enabling you to switch devices without losing your personal information. SIM cards are obtained and activated by the network provider that supports your GSM/GPRS network.
Using uPhone The uPhone Application Suite contains three programs that function together to provide a complete voice, data, and text messaging solution for a mobile device fitted with a radio modem: • Dialler emulates a mobile phone and is used to make and receive telephone calls. • Call Log displays a list of the most recent calls. • SMS Manager is a text messaging program. Accessing uPhone Tap Start > Programs > uPhone. Tap one of the icons to launch the program.
Icons and Bubble Messages Icon Description Tap this icon to display: Bubble Options Good signal strength. Full signal strength. Tap View to display the full message in SMS Manager. Incoming SMS message available. This bubble appears automatically when a new SMS message is received. It contains the sender’s information and the first line of the text message. A new voicemail message is available. Tap Reply to switch to the SMS Manager Compose screen.
Using the Dialler The Dialler is the is the program that manages your GSM/GPRS cell phone calls. To launch the Dialler, tap Start > Programs > uPhone > Dialler. The program launches and the uPhone Dialler screen opens: Three information lines: Dialler screen Network–name of service provider. Number/Name–dialed, incoming, and outgoing calls. Status–status of the phone. Signal Strength Four bars is optimal.
Sending a Call You can: • Tap the Send button . • Press the ENTER key on the keyboard. • Press the appropriate key combination on the keyboard. When the call is connected, the three information lines display the following: Network Operator Displays the name of the service provider you are using. Name/Number Displays the name and/or number you called. If the number is from your Phonebook, that entry displays. Status The status of the call. Idle - means no calls are incoming or outgoing.
If a second call is coming in, answering it automatically places the first call on hold. You can also reject the second call by tapping the End button. Ending a Call To end or reject a call, you can: • Tap the End button . • Press the appropriate key combination on the keyboard. Call Waiting If two calls are in progress, the above options end the active call and place the other on hold. To activate the call on hold, tap Send or press ENTER or the key combination to send calls.
Button Tapping this button… Join Held in Conference Call Connects the held call and the currently active call in a three-way conference call. More than three parties can join a conference call via networking; each of the other parties can add another call to the conference, and so on. End Held Drops the held call, and continues with the currently active call. Hide Closes the bubble.
Menu Item Description See Page USSD Sends text messages via USSD as opposed to SMS. 10-11 Exit Exit the uPhone Dialler. Ringtone Configuration Different ringtones, with individual volume settings, can be set for the following: Ring Tone Sounds on an incoming call. Message Tone Sounds on an incoming SMS or Voicemail notification. Call Waiting Tone Sounds to indicate an incoming call while you are already on a voice call. You can access Ringtones two ways: 1.
Phonebook The Phonebook contains the contacts from the SIM card and Pocket Contacts. If fixed dialing is set in the SIM, then only those numbers in the fixed dialing list are shown in the Phonebook, and only these numbers can be called from the Dialler. You can access the Phonebook manually by opening the Dialler and going to Tools > Phonebook. When you tap and hold on an entry, a popup menu displays. Dial Opens the Dialler with the number entered ready for dialing.
Field Description Set maximum available Display a window for the subscriber to enter a PIN number–“PIN2”–from the subscriber. When the correct PIN is entered, the maximum available charge units for the user is set on the SIM card. USSD Short for Unstructured Supplementary Service Data, (USSD) is a technology unique to GSM that enables session-based textmessaging as opposed to SMS, which is store-and-send text-messaging.
Name The phone number or the name if the call was from or to a matching entry in the Phonebook. Time Time and date the call started. This is the local time and date. Duration Duration of the call (hours:minutes:seconds). The clock starts when the call connects, not when dialed. From the drop-down list, select the option you want to view. To see everything, select All Calls. Tools Menu Clear Deletes the entire Call Log. Exit Closes the Call Log.
uPhone Configuration uPhone Settings enable you to establish the normal operating parameters for uPhone applications. Requirements To open the uPhone configuration tools, the GSM radio must be enabled and an active SIM must be installed. The configuration tools access the network directly. If you are not connected, settings cannot be configured and you will receive an error notification when you attempt to open the configuration tools.
Field Description This button is active only if PIN protection is set to On. Otherwise, the button is grayed-out. If you tap Change PIN, a dialog box appears enabling you to change the PIN. Change PIN Enter the PIN. Tap OK to save the change. While typing, the numbers appear as asterisks to hide the number from observation by third parties. Network Tab The Network tab provides the ability to choose between Automatic and Manual network selection.
Answerphone Select this option to divert calls to voicemail. To number Select this option to forward incoming calls to another number. Bar Tab The Bar tab sets enables you to bar both incoming and outgoing calls. Bar outgoing calls Bar incoming calls Change barring code Select one of the following options from the drop-down list: Not barred No restrictions on outgoing calls. International calls Bar international calls.
Messaging Tab The Messaging tab enables you to adjust the default SMS settings. Request Delivery Reports By default, the SMS manager receives a confirmation report that each SMS message has been sent. These confirmation reports can take up valuable space and memory. Therefore, you can cancel these reports on this tab by selecting Off and tapping OK. SMS number of retries 10 - 16 This setting enables you to control the number of times the system will try to send an SMS message until the message is sent.
SMS Manager Abbreviated for Short Message Service, SMS enables the transmission of short messages (140-160 characters) to and from a cell phone. SMS messages travel over the system's control channel, which is separate from the voice channel. SMS Manager supports creation, sending, receiving, and storing of SMS text messages. Text messages sent or received can be up to 160 characters long. Opening the SMS Manager You can access the SMS Manager two ways: 1. Tap Start > Programs > uPhone > SMS Manager, OR 2.
Sent Folder The Sent folder displays sent messages. Outbox Folder The Outbox folder displays text messages waiting to be sent. Sending an SMS Message 1. In the task tray at the bottom of the screen, tap New. The new message screen opens with the cursor active in the text area. 2. Tap inside the To: field. To add the number, you can type it in or tap To: to select an entry from your Phonebook. • You must type a number that is in the appropriate international ISDN format for the country you are dialing.
Icons at the Top of the Message Screen Icon Description At the top of the window: Copy selected text. Cut selected text. Paste text. Undo the previous action. This icon appears only in a message that has been sent. Tapping this button will re-send the message. In the task tray at the bottom of the window: Send all messages in the Outbox.
GPRS Settings uPhone includes pre-configured GPRS connection profiles to connect to a GPRS network. When the GSM driver is enabled uPhone selects the appropriate pre-configured profile based on the service provider information on the installed SIM card. Before connecting to GPRS, you need to confirm and save the selected uPhone GPRS profile (or create one) in uPhone GPRS Settings, then enter the ISP information in Microsoft’s connection manager. The default profiles are for a modem connection.
5. Because GPRS is ISP technology, you need to complete the connection profile in Microsoft’s connection manager with information from your ISP. On the Connections tab, tap Connections. The connections manager opens. 6. Tap Manage existing connections. This default GPRS profile loads into the connection manager based on the service provider profile selected in uPhone’s GPRS Settings; see Step 2 above. Note: A modem connection is the default connection type.
9. Tap Next. 10. Enter the number provided by your ISP or leave the default “GPRS” if no number has been provided. If you leave “GPRS,” the GSM radio uses the APN Number entered in the uPhone profile (see Step 2 above). Tap Next. 11. Enter the User name and Password provided by your ISP. Tap Finish. Entering your user name and password here in the connection manager profile means that you don’t have to enter them every time you try to connect via GPRS. 12.
11 Dolphin 7900 with GPS Overview GPS functionality can be integrated into certain Dolphin 7900 terminals with GSM/GPRS. There’s no need to carry multiple devices to get the job done because the 7900 integrates into one device powerful mobile computing, wireless full-area voice and data communications, and advanced GPS functionality. GPS Functionality The integrated GPS technology allows location tracking of workers and vehicles, providing better utilization of field assets.
Powering the GPS Module The GPS module is powered by the I/O Connector whose 8th pin can be set to power out at 5 volts (5V). I/O Connector In general, the 8th pin is disabled on Dolphin terminals. However, on Dolphin 7900 terminals with GPS, the 8th pin powers out by default. However, even when the 8th pin is set to power out, the I/O Connector will not power the GPS module during: • The cold boot process. 5V power out is restored after AutoInstall. • The warm boot process.
On the workstation or the terminal, open the DeviceConfig.exm file in EZConfig and navigate to DeviceConfig > System > Power Management > RS232 5V Power Out > Enable and make sure that the value is Enabled. On the workstation: On the terminal: To change the power out setting, change the Value to Disabled (on the workstation) or de-select the Enable key (on the terminal), save the DeviceConfig.exm file, and cold boot the terminal to apply the change.
Suspend/Resume with GPS When the terminal goes into suspend mode, power is removed from the GPS module. There are two ways to control the Suspend/ Resume activity of the terminal: via the keyboard or via activity timeout. Suspend Via Keyboard Combination Press Blue + Backlight keys. Suspend Via Activity timeout Dolphin terminals suspend when the device is inactive for a programmed period of time. The period of time is set in the Power System Setting; see Power on page 6-11.
Serial Communications The GPS module sends data to serial COM port 1 of the terminal. The default data rate is 4800 bps, which is non-configurable. Microsoft ActiveSync Because data from the GPS module is sent to the 7900 via the I/O connector, serial ActiveSync and other external serial RS-232 device input connections are not possible when the GPS module is powered on. However, USB ActiveSync is available at all times.
GPS Demo GPSdemo is a software application that comes loaded on GPS units and demonstrates the basic capabilities of the GPS module. GPSdemo accesses the serial port directly. This means that GPSdemo does not use the GPS Intermediate Driver provided by Microsoft because the GPS Intermediate Driver uses virtual COM ports to communicate, which is not necessary on Dolphin GPS units. For more information about Microsoft’s GPS Intermediate Driver, follow this link: http://msdn2.microsoft.
Position Tab The Position tab displays the positional information that results from the incoming NMEA data string. Satellites Tab The Satellites tab displays the current GPS satellite constellation, which are the satellites in view of the terminal. Vertical Bars Vertical bars with a height greater than zero indicate tracking satellites. Blue indicates that satellites are being used to determine the terminal’s position.
Power Tab You can verify if the GPS module is receiving power from the I/O connector on the Power tab. If 5V Power=ON, the 8th pin on the terminal’s I/O Connector (see page 11-2) is powering out and the GPS module is receiving. Enable 5V Out This button is active only if the GPS module is not currently powered. Tapping it activates the power out from the I/O connector. Disable 5V Out This button is active only if the GPS module is currently powered.
Dolphin QuadCharger Overview The Dolphin QuadCharger is a four-slot charging station that can charge a Li-ion battery in less than four hours. The fourth slot features a battery analyzer that completely resets and re-calibrates a battery and displays its resulting capacity. Compatibility The QuadCharger is compatible with the Li-ion batteries that power Dolphin 7900 Series terminals. Charging Process Each charging slot works independently of the other three.
Battery Capacity Indicator LEDs These LEDs give a readout of the remaining battery capacity after it has run through a complete analyze cycle. For more information, see Battery Capacity Indicator LEDs on page 12-2. Analyze Button Press this button to start a battery analyze cycle; see Using the Battery Analyzer on page 12-4. Status LEDs A status LED is located above each of the four battery slots. The color of the LED indicates the charge status of the batteries in its slot.
Supplying Power to the QuadCharger You must use the power adapter cable from Hand Held Products so that voltage is adjusted appropriately. 1. Locate the AC power adapter cable and plug it into the power source. 2. Connect the power cable to the power adapter. 3. Connect the power cable to the supply connector on the back of the QuadCharger. 4. Press the power switch to the ON position. The power LED illuminates green, and the charger performs a self-diagnostic test that lasts approximately five seconds.
Using the Battery Analyzer Purpose Using the Charge/Analyze slot helps you monitor the charge capacity of Li-ion batteries over time. The LEDs in this slot provides a readout of the battery’s capacity after a complete discharge and full charge. They tell you the maximum charge level the battery can hold. Location The battery analyzer is located in the fourth slot of the ChargeBase. Only batteries in this slot can be analyzed.
Mounting the QuadCharger The Dolphin QuadCharger should be on a dry, stable surface. To easily adapt the QuadCharger to your environment, it can be mounted on a flat, horizontal surface such as a desktop or workbench, or a flat, vertical surface such as a wall. When choosing a location, always bear in mind that • the mounting location must allow users easy access to power switch and power connector.
Wall Mounting The following graphic displays how mount a QuadCharger to a wall: Troubleshooting If you encounter problems with your Dolphin QuadCharger, refer to chart below for possible solutions. If problems persist, please contact Technical Support. Problem Issue The Status LED does not come on when Check the power connections on the Dolphin QuadCharger; make sure the I insert a battery pack into the Dolphin POWER switch is ON and the battery pack is properly seated.
Overview As the hub of your Dolphin 7900 system, the Dolphin HomeBase charging and communication cradle supports both RS-232 and USB communications, enabling your terminal to interface with the majority of PC-based enterprise systems. Communications RS-232 transmits data at speeds of up to 115 Kbps. With USB port, the data transmission rate goes up to 12 Mbps.
Front Panel Terminal Well DOCK LED AUX Battery LED COMM LED AUX Battery LED Indicates status of the battery charging in the auxiliary battery well; see page 13-5. This color… means… Orange The auxiliary battery is charging. Green The auxiliary battery has completed charging and is ready for use. COMM LED This is the communication LED. It indicates the status of data transfer between the Dolphin terminal and the host PC.
Back Panel Auxiliary Battery Well DC Power RS-232 Port Jack USB Port Auxiliary Battery Well The auxiliary battery well charges an additional Li-ion battery pack independently of the terminal well. This feature ensures that you can always have a fully-charged battery for your Dolphin terminal; see Charging a Spare Battery in the Auxiliary Battery Well on page 13-5. DC Power Jack Use a power cable from Hand Held Products to supply power to this power jack.
RS-232 Serial Connector The following diagram displays the pins of the RS-232 serial connector of the Back Panel (see page 13-3). Pin # Description 1 2 3 4 5 6 7 8 9 Internal Jumper to Pin 6 TXD RXD DSR GND DTR CTS RTS RI Note: Signals referenced are for a DTE device. The HomeBase is at a right-angle to the printed circuit board (PCB). The ninth pin has a ring indicator (RI). Powering the Dolphin HomeBase The terminal requires 9.
Charging the Main Battery The Dolphin HomeBase powers the terminal and fully charges its main battery pack in less than four hours. To check battery power, see Power on page 6-11. To Power a Terminal and Charge its Main Battery 1. Install the battery pack in the terminal; see Install the Main Battery Pack on page 2-5. 2. Power the HomeBase; see Powering the Dolphin HomeBase on page 13-4. 3.
ActiveSync Communications with the HomeBase The HomeBase can communicate via USB or RS-232 using ActiveSync 4.1 or higher. The HomeBase should have only one type of interface cable connected at a time, either USB or RS-232. USB The USB Port (see page 13-3) on the back panel allows the Dolphin terminal to communicate with a PC or to networked through a USB hub. The HomeBase acts as a USB device by interfacing the USB signals of the Dolphin to the USB signals of the host computer.
RS-232 Communications Connecting the Cables Connect the HomeBase to the host computer or other device by plugging an RS-232 serial cable into the RS-232 Port (see page 13-3) on the back panel. The wiring of your cable depends on whether the other device is set up as a Data Communications Equipment (DCE) or Data Terminal Equipment (DTE) device. The HomeBase communication port is configured as a DCE device.
Communicating with the Dolphin Terminal 1. Insert the Dolphin terminal into the terminal well of the HomeBase. • • • The DOCK LED lights green. If the DOCK LED does not light, make sure that the terminal is properly seated. You may need to remove and re-insert the terminal. The Dolphin terminal activates. If the terminal does not power on, verify that the Hand Held Products power supply is properly connected to the cradle and plugged into a functioning outlet.
Mounting the HomeBase Set the Dolphin HomeBase on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the HomeBase. When choosing a location, bear in mind that: • The mounting location must allow users easy access to the AUX Battery LED (see page 13-2). • The serial, USB, and power jack face straight out of the rear panel.
2. Attach the bottom panel to the mounting bracket - match the holes to the secured screws. Open slot for the connector and power cables 3. Fasten the screws to secure the HomeBase to the mounting bracket. 4. Turn the secured HomeBase right side up.
5. Using the appropriate screws, secure the mounting bracket to the wall or vertical surface as shown.
13 - 12 Rev F 10/16/07 Dolphin® 7900 User’s Guide
Overview The Dolphin ChargeBase is a four-slot charging cradle that can power four Dolphin terminals, and charge their main batteries in less than four hours. Each charging slot charges terminals independently of the other slots. Charging The Dolphin ChargeBase completes a full charge of the main battery pack in less than four hours.
Charge LEDs Each terminal well displays a Charge LED on the front that lights green to indicate charging. For details, see Charging Terminals in the ChargeBase on page 14-3. Back Panel Power Supply Connector Power Supply Connector This connector receives input from the power adapter. Plug the power connector cable from the power adapter into this connector. There is no ON/OFF switch on the back panel of the ChargeBase. The ON/OFF switch is on the power adapter.
Supplying Power to the ChargeBase ! You must use the power adapter provided by Hand Held Products with the Dolphin ChargeBase. Using a non-Hand Held Products power adapter voids your warranty and could result in serious damage to the circuitry of the Dolphin ChargeBase. 1. Be sure the power switch on the power adapter is in the OFF position. 2. Plug the power cord into the power adapter. 3. Plug the power connector cable into the power connector on the back panel of the ChargeBase. 4.
Bottom Panel The bottom panel of the Dolphin ChargeBase offers two mounting options: insert a DIN Rail in the available slot for desk mounting or secure two mounting brackets with the available screw slots. Screw Slots Rubber Feet DIN Rail Slot Using the DIN Rail All Dolphin charging/communication cradles have a slot for a 7.5mm (high) X 35mm (wide) DIN rail on the bottom panel that enables you to mount to a desk or secure, flat surface. 1. Slide the DIN Rail into the DIN Rail slot on the bottom panel.
3. Secure the DIN Rail to a stable, flat horizontal surface. Using the Mounting Brackets A wall mount kit can be purchased separately. It contains two mounting brackets to secure both ends of the ChargeBase. Use the screws and the mounting brackets to mount the ChargeBase to a wall or other vertical surface. Each mounting bracket contains an open slot in the back to accommodate the connector cables. The bottom panel of the ChargeBase contains rubber feet that hold it steady on a flat surface.
3. Using the nuts and bolts, secure the mounting brackets to the bottom panel. 4. Secure the mounting brackets to an appropriate horizontal surface.
Overview The Dolphin Mobile Base charging and communication cradle is designed specifically for in-premise and in-transit data collection applications. It features a flexible mounting bracket, a cigarette lighter adapter, and a power cable to adapt it to your environment. When a terminal is seated in the Mobile Base, its main battery pack charges in less than four hours. The serial connector supports RS-232 communication and power out to peripheral devices, such as hand held scanners.
Dolphin Mobile Base Hardware Overview Front Panel Latch Spring Arm Assembly Terminal Well DOCK LED COMM LED Latch You can use the latch at the top of the spring arm assembly to snap a seated terminal into place. The latch can rest on top of the hand strap slot on the back panel of the terminal; see page 15-7. Spring Arm Assembly For more information, see Spring Arm Assembly on page 15-5. Terminal Well Place the terminal in this well to communicate with a host device and charge the main battery pack.
Red Data is being sent from the host device to the Dolphin Mobile Base. Green Data is being sent from the Dolphin Mobile Base to the host device. Orange Data is being sent at high data rates. Bottom Panel Power Supply Connector RS-232 Serial Communications Port Power Supply Connector Attach a power cable from Hand Held Products to this connector. The Mobile Base can be powered by an external DC power source between 11–48 VDC.
RS-232 Serial Communications Port Use a standard serial cable to connect to the host device via RS-232. The following diagram displays the pin diagram of the serial connector of the bottom panel of the Mobile Base. Pin # Description 1 2 3 4 5 6 7 8 9 Internal Jumper to Pin 6 TXD RXD DSR GND DTR CTS RTS 5 VOLT OUT Signals referenced are for a DTE device. The Mobile Base connector is straight to the printed circuit board (PCB). The ninth pin sends 500mA at 5 Volts power out.
Back Panel Latch Spring Arm Assembly Ball Joint Spring Arm Assembly The spring arm assembly holds the terminal securely in place and connects the Mobile Base to the ball joint. Ball Joint There are two ball joints: one on the back of the Mobile Base and one on the mounting bracket. Both ball joints are inserted into the mounting bracket and secured by the turnscrew.
Powering the Dolphin Terminal When seated in a Mobile Base that is connected to the appropriate power source, the Dolphin terminal receives the power to charge its main battery and run its internal circuitry. Keep the Mobile Base plugged into the power source so that the Dolphin terminal battery pack stays fully charged.
Mounting the Dolphin Mobile Base There are three items you use to mount the Dolphin Mobile Base: the ball joints on the both the back panel and the ball joint connector, the mounting bracket, and the turnscrew. Latch - securing the terminal Turnscrew Mounting Bracket Ball Joint Connector Turnscrew The turnscrew is located on the top of the bracket. Rotate the turnscrew to secure or loosen the ball joint slots.
15 - 8 Rev F 10/16/07 Dolphin® 7900 User’s Guide
Product Service and Repair Hand Held Products provides service for all its products through service centers throughout the world. To obtain warranty or nonwarranty service, return the unit to Hand Held Products (postage paid) with a copy of the dated purchase record attached. Contact the appropriate location below to obtain a Return Material Authorization number (RMA #) before returning the product. North America Telephone: Fax: E-mail: (800) 782-4263 (803) 835-8012 naservice@handheld.
Technical Assistance If you need assistance installing or troubleshooting, please call your Distributor or the nearest Hand Held Products technical support office: North America/Canada Telephone: Fax number: E-mail: (800) 782-4263 (315) 554-6705 natechsupport@handheld.com Latin America Telephone: Telephone: E-mail: (803) 835-8000 (800) 782-4263 latechsupport@handheld.com Brazil Telephone: Fax: E-mail: +55 (21) 2178-0500 +55 (21) 2178-0505 brsuporte@handheld.
Limited Warranty Hand Held Products, Inc. ("Hand Held Products") warrants its products to be free from defects in materials and workmanship and to conform to Hand Held Products’ published specifications applicable to the products purchased at the time of shipment.
16 - 4 Rev F 10/16/07 Dolphin® 7900 User’s Guide
Hand Held Products, Inc. 700 Visions Drive P.O.
