User`s guide

7 - 1
7
Communication
Connections Tab
The Connections system setting provides access to the terminal’s various wireless communication
options.
Note: All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP).
Icon Setting Tapping this icon… See Page
Beam
Enables infrared communication.
7-11
Bluetooth Configures the Bluetooth radio.
This icon appears only if a Bluetooth radio and driver is installed
on the terminal.
9-1
Connections Opens Microsoft’s connections manager.
7-4
Dolphin
Wireless
Manager
Manages the wireless radios installed in the terminal.
7-6
USB to PC Enables advanced USB communication via ActiveSync, which
is wired communication.
7-8
Wi-Fi Enables you to configure Wireless Zero Config.
This icon appears only if the 802.11b/g driver is loaded on the terminal and the
Honeywell WLAN Security Supplicant is not loaded.
By default, the Wireless Zero Config is disabled and the supplicant is loaded.
This icon will appear only if you removed the supplicant and cold boot the
terminal.