DR65 Installation and Owners Manual
Setting the Controls
BUILTIN HUMIDITY CONTROL: An intuitive ‘set and forget’ humidistat
is built into the DR65A3000 to set the humidity level right on the device.
Optional external control wiring is also available. If an external dehumidi-
stat is used, the on-board dehumidification control must be set to the Off
position.
Control Options
The DR65A3000 may be used with one of the following external controls:
HumidiPRO Digital Control
• Manual dehumidification control
• Dehumidifier compressor protection
• RH% and outdoor temperature calibration
• Adjustable high and low range stops (1090%)
TrueIAQ Digital Control
• Automatic adjustments maintain fresh air in home.
• Sensor for displaying outdoor temperature and humidity.
• Advanced ventilation programming includes economizing and extreme
condition shutdown.
• Maintenance and service reminders.
• Controls other indoor air quality equipment.
Manual Dehumidistat and Automatic Ventilation Controls
• Manual humidity control with intuitive comfort settings.
• Automatic W8150 ventilation control to ASHRAE standard, or for
continuous operation.
Prestige™ IAQ Kit
• Controls both heating/cooling and ventilation.
• Wireless sensor for displaying outdoor temperature and humidity.
• Advanced ventilation programming includes economizing and extreme
condition shutdown.
• Maintenance and service reminders.
• High definition color display.
• RedLINK™ Wireless technology
VisionPRO™ or Prestige™
• Controls both heating/cooling and ventilation.
• Wireless sensor for displaying outdoor temperature and humidity.
• Ventilation programming for time of day or Ashrae standards.
• Optional ventilation lockouts for high/low temp or humidity conditions
when C7089R1013 wireless outdoor sensor is used.
• WiFi™ or RedLINK™ Wireless technology
DR65A3000 Dehumidification System 33-00297EFS—01 3