user manual

Operation
Rev 3.03 80 Document 900.0315
02/07
Note You cannot enter PTZ mode when the DVR detects video loss on
the selected camera or the camera is turned off or set up as
Covert 1 or Covert 2.
Press MENU in PTZ mode to display the PTZ Mode screen. Set the feature you wish to
control by selecting it from the menu. Refer to the camera manufacturer’s instructions
for the proper settings. Depending on the camera specifications, some features may
not be supported.
Figure 4-3 PTZ Menu Screen
• Press Set Preset to configure the presets for PTZ cameras.
• Press Quit to close the menu.
Setting PTZ Presets
After you have the camera at the desired installation settings, you can save camera
position settings as Presets so that you can go directly to desired views.
1. Select Set Preset in the PTZ Menu.
2. Select the number you want to assign to the preset, and then press  . Use the
Virtual Keyboard to enter the preset name.
3. Press  to save the preset.
Figure 4-4 PTZ Preset Screen