Owner's Manual

E
3
Point Toxic and
Combustible Gas
Monitor
E
3
Point goes beyond protection to offer your
building greater performance and productivity.
Reex
®
Keeps You Safer
Only Honeywell’s patented Reex
®
technology
adds this extra degree of precision and diligence
to sensor monitoring to make doubly sure you’re
safe. Reex bounces electrical signals into the
E
3
Point electrochemical sensor cell at regular
intervals, a form of electronic bump testing and
continuous monitoring of cell response.
Oscilloscope graph shows cell responding
to Reex pulse, indicating sensor condition.
Ergonomic
features built into
E
3
Point include a
hinged door for
maintenance ease.
GREEN shows optimal sensor condition
(dynamic responsiveness to gas).
RED shows degraded sensor condition
(indicating cell dry-out or failure).
Flexible Operation
• Comes in standalone, standalone with remote
(dual gas mode) or network versions
• Connects to analog or digital systems
• Works with virtually any BAS including BACnet,
Modbus or LonWorks*
• Connects to wired or wireless system
(via 301CW wireless controller)
• Wall or duct mount
• Factory-calibrated cartridges
Cost Effective
• Saves energy through Demand Control
Ventilation (DCV)
• Simplies installation/maintenance through
plug-n-play sensor
• Remote sensor option provides dual gas
monitoring (standalone version only)
• Optimizes BAS, re, ventilation
and other security systems
Versatile Communications
• Works through BAS to improve fault
diagnostics and collect data on gas
concentation levels, sensor condition, etc.
• Couple with 301C to log data and
daisy-chain up to 96 E
3
Point units
Advanced Sensing Technology
• Detects CO, NO
2
, O
2
, H
2
, H
2
S, CH
4
, C
3
H
8
• Advanced electrochemical (for toxic gases)
and catalytic bead (for combustible gases)
sensor performance
• Uses patented Reex
®
and smart
cartridge technologies
Range of Accessories
• Factory-calibrated replacement cartridges
• Power transformer
• Vandal-resistant steel wire detector guards
• Tamper-proof screws
• Horns and strobes
Electrical Certications
• US (ANSI/UL 61010-1)
• Canada (CSA C22.2 No. 61010-1)
* pending - call your sales rep for information
Plug-N-Play Ease
E
3
Point’s plug-n-play sensor is factory
calibrated and works out of the box. Upon
installation, E
3
Point automatically congures
for quick operation. You benet from easier
installation and maintenance, and greater
adaptability to changing building
and safety requirements.
Efficient
Operations
Smart sensor design,
extreme temperature
range, etc. optimize
building performance
+
Energy
Savings
On-demand
ventilation controls
energy use
+
Economical
Value
Reduces cost of
installation, operation
and maintenance
=
E
3
Point
Main Unit
Remote Unit
Plug-N-Play
Sensor Cartridge
firealarmresources.com