Quick Start Guide
Table Of Contents
- ScanPal™ EDA61K Series
- Out of the Box
- Memory Card Specifications
- Mobile Computer Features
- Install a Micro SIM Card
- Install a microSD Card (Optional)
- Install the Battery
- Charge the EDA61K
- Remove the Battery
- Turn Power On/Off
- Sleep Mode
- Adjust the Display Sleep Time
- About the Home Screen
- Navigation and Function Buttons
- About Provisioning Mode
- Scan a Bar Code with the Scan Demo
- Sync Data
- Restart the Mobile Computer
- Support
- Documentation
- Limited Warranty
- Patents
12
About Provisioning Mode
After completing the out-of-box set up process, Provisioning
mode is automatically turned off. Scanning a bar code to install
applications, certificates, configuration files, and licenses on
the computer is restricted unless you enable Provisioning mode
in the Settings app. To learn more, see the user guide.
Scan a Bar Code with the Scan Demo
For optimum performance, avoid reflections by scanning the
bar code at a slight angle.
1. Swipe up on the screen to access all apps.
2. Select Demos > Scan Demo.
3. Point the computer at the bar
code.
4. Touch Scan on the screen or
press and hold any Scan
button. Center the aiming
beam over the bar code.
The decode results appear on the
screen.
Note: In the Scan Demo app, not all bar code symbologies are
enabled by default. If a bar code does not scan, the correct
symbology may not be enabled. To learn how to modify the
default app settings, see the user guide.