Quick Start Guide
Table Of Contents
- ScanPal™ EDA61K Series
- Out of the Box
- Memory Card Specifications
- Mobile Computer Features
- Install a Micro SIM Card
- Install a microSD Card (Optional)
- Install the Battery
- Charge the EDA61K
- Remove the Battery
- Turn Power On/Off
- Sleep Mode
- Adjust the Display Sleep Time
- About the Home Screen
- Navigation and Function Buttons
- About Provisioning Mode
- Scan a Bar Code with the Scan Demo
- Sync Data
- Restart the Mobile Computer
- Support
- Documentation
- Limited Warranty
- Patents
7
Charge the EDA61K
The EDA61K mobile computer ships with a partially charged
battery. Charge the battery with an EDA61K or EDA61K
charging device for a minimum of 4 hours. Using the computer
while charging the battery increases the time required to reach
a full charge.
EDA61K mobile computer are designed for use with EDA61K
and EDA61K series charging accessories. For more information
about accessories, see the ScanPal EDA60/EDA61K Series
Enterprise Mobile computer Accessories Guide” at
www.honeywellaidc.com.
We recommend the use of Honeywell accessories and
power adapters. Use of any non-Honeywell
accessories or power adapters may cause damage not
covered by the warranty.
Ensure all components are dry prior to mating the
computers and batteries with peripheral devices.
Mating wet components may cause damage not
covered by the warranty.