Manual
Table Of Contents
- 1 Product Features of ScanPal Series EDA70-X Terminal
- About EDA70-X Terminal
- Battery
- Powering on
- Unlocking the screen
- Scanning Indicator
- Setting screen backlight
- Audio features
- Inserting SD card
- File transfer
- How to view files on EDA70-X
- EDA70-X Accessories
- 2 User interface and applications
- 3 Scan Function
- 4 Using Telecommunication Function
- 5 Using Camera
- 6 Configuring Terminal
- 7 Management and Maintenance
- 8 Specifications
Chapter 7: Management and Maintenance
70
User Guide for ScanPal Series Terminal
Restarting the Terminal
If the terminal or an application is locked or doesn't respond when pressing the power key,
you need to restart the terminal.
When restarting, the terminal will use the current configuration saved in the flash memory.
Try the following ways to restart the terminal:
• Restarting the system: Restarts the terminal’s operating system
• Restarting hardware: If there is no response after pressing the power button, hold it
down for 13 seconds to force restart of the device
• Restore default settings: Clears all data in the terminal including all applications,
data and files except built-in files or data in the movable storage device
Restarting the system
When an application is not responding, you may need to restart the terminal to resolve the
issue.
1. Save the file and close open applications.
2. Press and hold "Power Key" until the following interface displayed:
3. Tap Power off. EDA70-X is powered off.
4. Press down "Power Key" to restart EDA70-X.